PD19110

Bradley floor-mounted emergency safety shower with yellow plastic showerhead, certified ANSI Z358.1-2009.

$840.85

Return conditions : No returnable

Bradley floor-mounted emergency safety shower (S19110), with impact-resistant yellow plastic showerhead. Certified ANSI Z358.1-2009.

This emergency safety shower has a flow of 22 GPM (83.3 L/min), exceeding the minimum flow requirement of 20 GPM (76 L/min). This shower does not include a device for controlling water temperature.

Ideal for laboratories, medical facilities, industries, workshops, garages, airports, food processing plants, paper mills, and any other places where workers risk being exposed to dust, particulates, and/or hazardous, irritating or corrosive materials.

This floor-mounted emergency safety shower can be installed in open areas, away from walls. It is designed to accommodate ceilings of 8 feet (2.44 m). The emergency safety shower is easy to activate in a single step, simply by pulling on the rigid, triangular handle. Once activated, the emergency safety shower will stay on until manually turned off by returning the handle to its original position.

The emergency safety shower has a SpinTec ABS yellow plastic showerhead that imparts a spiralling motion to the water jet, allowing an even flow of water over a larger area. Pipes are made of galvanized steel protected by yellow Bradtect covering. This safety shower does not include a drainpipe.

The package includes:

  • Parts necessary for the installation of the emergency shower and the connection to a water supply (some parts are not supplied, see instructions)
  • 1 universal safety sign to indicate the location of the emergency shower
  • 1 inspection tag
  • 1 instructions booklet, available only in English. PDF version also available, see below.

The manufacturer recommends the installation of a thermostatic valve in order to comply with ANSI Z358.1-2009 standards. A thermostatic valve keeps rinsing water at a lukewarm temperature. Rinsing water should not be too cold (for more comfort while rinsing for the minimum required rinsing time of 15 minutes) nor too hot (to avoid aggravating eye or face injuries and to avoid scalding).

We would also like to remind our customers that the emergency shower must not be used to rinse eyes, since the water flow is too strong and may aggravate eye injuries.

Type of productSafety equipment
Main categoryFirst aid and emergency showers
Sub categoryEmergency showers
Sub sub categoryEmergency showers
Name of the productBradley Emergency Body Shower
Product codePD19110
ANSI RequirementsCompliance ANSI Z358.1-2009
ManufacturerBradley
FeaturesNot include a device for controlling water temperature
IncludesParts necessary for the installation of the emergency shower and eyewash station and the connection to a water supply (some parts are not supplied, see instructions)
Installation specificationsThis body shower is floor mounted, so it can be installed in open areas, away from walls. It is designed for ceilings up to 8 feet (2.44 m) high
Activation typeThe emergency safety shower is easy to activate in a single step, simply by pulling on the rigid, triangular handle. Once activated, the emergency safety shower will stay on until manually turned off by returning the handle to its original position.
Operating flow rateFlow of 22 GPM (83.3 L/min), exceeding the minimum flow requirement of 20 GPM (76 L/min)
Material1This body shower is equipped with a yellow ABS plastic shower head from SpinTec. The piping is made of galvanized steel protected by the yellow Bradtect coating
Length (in/cm)40 in / 101.6 cm
Width (in/cm)12 in / 30.48 cm
Height (in/cm)12 in / 30.4 cm
Weight (lb/kg)33 lb / 83.2 Kg
Sold byUnit
Return conditionsNo returnable

Accessories

3 other products in the same category: