SAH9

BitBuddie dust & slurry shroud for drills and saws of maximum diameter 8” (20 cm). Ideal for construction and renovation work.

$110.45

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

BitBuddie dust and slurry shroud for drills and saws, with adjustable opening of maximum 8" (20 cm) in diameter. This product is ideal for construction and renovation work where asbestos, concrete, drywall (Gyproc) or stone dust may be released. Sold individually.

Bitbuddie manufacturer’s code: D1908.

This shroud is made of flexible clear plastic and saves time and money when performing clean-up or decontamination work. It allows using power tools such as drills and saws without creating a hazardous dust cloud. The dust shroud can be used with diamond drill bits up to 8" (20 cm) wide.

To use, simply connect the dust shroud to a vacuum attachment, cut the shroud opening to the required size and place the shroud over the drilling spot. A vertical slot may also be cut, for use when cutting drywall (Gyproc). While the vacuum is on, the suction effect will keep the shroud in place without requiring any other clamp. This dust shroud is also particularly useful when drilling holes in a ceiling.

Dust can cause many health problems, including skin irritation, respiratory problems and allergic reactions. The lungs are particularly vulnerable, as they are constantly exposed to the hazards of the dust we breathe. It’s therefore important to take preventive measures, which is why we offer you this dust collector, because for Sylprotec, your safety is our priority Tm.

The BitBuddie is the professional contractor’s n°1 choice for dust control when using a hand-held drill, to provide a dust-free working environment. This device captures 99% of the dust generated during drilling. Its quick and easy installation makes it an indispensable accessory. The transparent shell gives contractors the visibility they need for optimum control.

Our drill dust collector is a smart buy for several reasons. Firstly, it can help reduce the amount of dust and debris generated during drilling, which can improve air quality in your workspace and reduce the health risks associated with dust inhalation, which is why we offer this product. The number of workers affected by respiratory diseases involving asbestos fibers and silica is significant. These diseases are incurable, and the workers concerned unfortunately only realize this after many years. Often at the end of their careers, when they should be enjoying life.

Please note that for asbestos and silica removal work, you’ll need a HEPA vacuum cleaner suitable for the job. HEPA vacuums should, among other things, have passed a DOP test. Contact our customer service department for further details.

Special features:
This type of dust collector is normally used when working with products containing asbestos or silica. This is moderate-risk work. It prevents the dispersion of asbestos fibers and reduces the time required for decontamination.

See the manufacturer's video with English subtitles, under the video tab.

Maintenance and service life:
To maintain your dust collector, wipe each element with a sponge soaked in water and a mild cleaning product, then dry each element with a clean cloth. The use of a respirator (mask) of at least category N95 is recommended.

Other similar models you may need:

SAH7, dust collector for drill with 1–3/8″ (3.5 cm diameter) hole.

SAH8, a dust collector for drills or cutters with an adjustable diameter from 1″ to 4″ (2.5 cm to 10 cm) is also suitable for drills with large bits.

SAH9, dust collector for drills and saws with a maximum diameter of 8″ (20 cm).

SAH10, dust collector kit for gas saws.

SAH15, D-Capture universal dust collector set for drills (2.5 cm diameter).

SAH18, universal dust collector set for reciprocating saws.

SAH19, CutBuddie 4″ to 5″ grinder dust collector kit.

Suggestions:
Need additional safety equipment? See items; (SAD6) industrial vacuum cleaner with 8gal tank (U.S.). (R8233) P100 respirator with 3M Cool Flow™ valve against oily particles & certain hazardous particles. (SATB) Blue polyethylene adhesive tape. For sealing openings where asbestos is present (SAHFIB) Fiberspray aerosol product used as a temporary or permanent encapsulant for small surfaces 8 oz. size.

See "Accessories" at bottom of page. If you're looking for work equipment, check out the following products: the regulatory poster for work involving asbestos (EAMIANTE), bags for disposing of asbestos-containing construction waste, the bilingual yellow bag (SAC2640) for asbestos waste and its complement, the transparent bag (SAC2640C) to go over the yellow bag.

Text colored green corresponds to hyperlinks to specific safety equipment or general information.

Type of productSafety equipment
Main categoryIndustrial accessoiries
Sub categoryAsbestos decontamination
Name of the productUniversal dust collector for drills
Product codeSAH9
ManufacturerDustless
Country of originUnited State of America
FeaturesThis dust collector is adjustable in size up to a maximum of 8" (20 cm), for drills or saws
Additional FeaturesThis type of dust collector is normally used when working with products containing asbestos or silica. It has the advantage of reducing risks to moderate or low levels
Environmental characteristicsThis device captures 99% of the dust generated during cutting. It prevents the dispersion of asbestos fibers and reduces the time required for decontamination
Feature that facilitates useThis product is ideal for construction and renovation as it can vacuum dust from asbestos, concrete, drywall (Gyproc), stone, etc
Connects withThis dust collector can be connected to various tools such as drills or saws, and its surface can be adjusted up to a maximum of 8" (20 cm)
MaterialPlastic
WashableWipe each element with a sponge soaked in water and a mild cleaning product, then dry each element with a clean cloth. It is recommended to use at least a category N95 mask
Length (in/cm)4 in / 10.16 cm
Width (in/cm)4 in / 10.16 cm
Height (in/cm)1 in / 2.54 cm
Weight (lb/kg)1 lb/ 0.45 Kg
ColorTransparent
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Accessories

30 other products in the same category:

Video

Click on a thumbnail to load the video