CCHARIOT

Metal base for the installation of a fire extinguisher on a forklift

$19.25

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Metal base that allows the installation of a fire extinguisher (from 2-1/2 to 5 pounds) on the vertical structure of an elevator truck. This base is non-destructive when installing the extinguisher hook. The base measures 10 cm between the two 2 inch bolts.

Placement:
According to the NFPA 10 standard for portable fire extinguishers, the operational readiness of these pieces of equipment is crucial. Placing strategically such an important piece of equipment is the sensible thing to do. At last, a portable fire extinguisher shall never be left standing on the floor.

Restriction: 
It should be noted that the base is not compatible with all forklift structures.

Maintenance:
It is crucial to use flat screws to fix your bracket in order to avoid cutting notches on the cylinder of your extinguishers. More often than not, fire extinguishers are nicked by round-head screws. Also, note that no clothing or any other object shall ever be suspended on the bracket or the fire extinguisher.

Suggestions:
Need a portable fire extinguisher or heavy-duty hook? See the items; EXAB5VR or CUNV5 under "Accessories" at the Suggestions: bottom of the page.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

Type of productSafety equipment
Main categoryFire protection
Sub categoryHooks for portable fire extinguisher
Product codeCUN5
Length (in/cm)10 in / 25.4 cm
Width (in/cm)4 in / 10.16 cm
Height (in/cm)4 in / 10.1 cm
Weight (lb/kg)0.5 lb / 0.22 Kg
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Accessories

30 other products in the same category: