FPA825

Grip reusable concrete anchorage connector for fall protection. This stainless steel anchorage connector supports 400 lbs

$228.00

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page.

Grip reusable concrete anchorage connector for fall protection. This steel anchorage connector can support a weight of 400 lbs (181 kg).

The Grip concrete can resist a tensile strength of 5000 lbs (22 kN) which meets the standard ANSI Z359.1-2007, but also OSHA 1910.66, OSHA 1926.502 and ANSI A10.32.

The device consists of a polyurethane coated steel aircraft cable of a ¼ in (7 mm) in diameter; however one must drill a ¾ in (19 mm) diameter hole to insert the device safely. It also features a 304 stainless steel end termination and a zinc coated steel spring.

This product can resist hostile environments with rough temperatures from -40°F to 130°F (-40°C to 54˚C).

The Grip anchorage connector may be pulled in all directions up to 90°. This anchor can thus be installed to the floor, the ceiling or the walls. Do not use this item with horizontal lifeline systems. Miller also recommends to never leave a unit inserted in a hole overnight.

A safe installation of this anchor requires a smooth surface made of concrete to allow a firm footing. Moreover, the concrete surface must be at least 5 in (127 mm) thick and resist to a minimum compressive strength of 3000 Psi (20.7 MPa). The anchor must be positioned at least 6 in (152.4 mm) away from edges and 3 in (76.2 mm) deep. Please consult the manufacturer’s manual for more details and also to learn how to drill a hole in concrete for this device.

The worker is responsible for visually inspecting his equipment before each use. During this routine inspection, the worker must note any signs of degradation, malfunction, or breakage. The anchor will have to be replaced if any such signs are detected.

On top of this routine inspection, the anchor must be inspected by a qualified person different than the worker. The frequency of these inspections varies according to the manufacturer. Some manufacturers require an inspection every 90 days, others every 180 days, or even yearly. These inspections should be performed more often if your equipment is used in extreme environmental working conditions.

Any equipment that has withstood a fall or an impact must be scrapped.

These anchors come with certification labels

Type of product Safety equipment
Main category Personal protection
Sub category Fall protection
Sub sub category Anchorage & connectors
Name of the product Anchor connector
Product code FPA825
Approved/Certified ANSI Z359.7-2011, OSHA 1926.502 et OSHA 1910.66.
Features The innovative swivel design of this anchor allows for a 360° rotation of the D-ring to prevent the lanyard from rolling up and also allows for a 180° swivel to eliminate any overload on the lanyard's carabiner opening
Format Temporary
Material Stainless steel
Height (in/cm) 3 in / 7.6 cm
Length (in/cm) 8 in / 20.32 cm
Width (in/cm) 3 in / 7.6 cm
Weight (lb/kg) 2 lbs / 0.9 Kg
Color Green
Sold by Unit
Caution The maximum weight supported is 400 lbs (181 kg), which includes the weight of tools and any other equipment carried by the worker.
Return conditions No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page.

Réponse question miller 496 FR

Réponse à une question miller 496_FR

Download (526.27k)

Reviews

No customer reviews for the moment.

Write a review
Grip reusable concrete anchorage connector for fall protection. This stainless steel anchorage connector supports 400 lbs

Grip reusable concrete anchorage connector for fall protection. This stainless steel anchorage connector supports 400 lbs

Accessories

18 other products in the same category: