FPA824

5K Swivel® zinc-plated permanent anchor with mounting hardware for fall protection on steel structures.

$152.25

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page.

5K Swivel® zinc plated permanent anchor with steel mounting hardware for fall protection. The innovative swivel design provides 360° D-ring rotation to prevent accidental roll-out when in use. It also provides 180 ° flip to prevent accidental gate load. This anchor can support a weight of 310 lbs (141 kg), including clothing, tools and equipment. Sold individually.

According to the manufacturer, 5K Swivel® zinc-plated anchor has been designed to withstand a 5000 lbs (22 kN). This anchor meets all applicable OSHA and ANSI requirements: ANSI Z359.1-2007, ANSI Z359.7-2011, OSHA 1,926,502 and OSHA 1910.66.

A safe installation of this anchor requires a smooth surface made of steel to allow a firm footing. The anchor shall be secured on a steel framework which can withstand static forces of at least 5000 lbs. The whole structure shall also be verified and approved by a qualified engineer to ensure it is functional and secure. The anchor includes a 5K® steel bolt with hexagonal head and a steel sleeve anchor. For more information, please consult the specifications sheet and the instructions manual, available as PDF documents under the Download tab (English only).

Anchor weight: 1.1 Lb (0.5 Kg)

The user of this anchor must be aware of fall hazards surrounding him. Among other factors, is there an adequate fall clearance below the work area? Are there any obstacles in the way? Are there emergency measures in place to recover a fallen worker? These are all questions one must ask himself.

The worker is responsible for visually inspecting his fall protection equipment before each use. During this routine inspection, the worker must note any signs of degradation, malfunction, or breakage. Any anchor showing signs of wear and tear must be scrapped.

On top of this routine inspection, the anchor must be inspected by a qualified person different than the worker. These inspections should be performed more often if your equipment is used in extreme environmental working conditions.

Replace the anchor as soon as it has withstood an impact or arrested a fall. It is recommended to disassemble the anchor and to dispose of each part separately, so as to avoid accidental reuse of the anchor.

This anchor is supplied with a certification label wrapped around it.

Type of product Safety equipment
Main category Personal protection
Sub category Fall protection
Sub sub category Anchorage & connectors
Name of the product Permanent swivel anchor
Product code FPA824
Approved/Certified ANSI A10.32, ANSI Z359.1-2007 et OSHA 1926.502, 1910.66
Manufacturer Swivel®
Features The innovative swivel design of this anchor allows for a 360° rotation of the D-ring to prevent the lanyard from rolling up and also allows for a 180° swivel to eliminate any overload on the lanyard's carabiner opening
Material Galvanized steel
Material1 Galvanized steel
Height (in/cm) 2 in / 5.08 cm
Length (in/cm) 3 in / 7.6 cm
Width (in/cm) 3 in / 7.6 cm
Weight (lb/kg) 3 lbs / 1.4 Kg
Sold by Unit
Caution The maximum weight supported is 310 lbs (141 kg), which includes the weight of tools and any other equipment carried by the worker.
Return conditions No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page.

Reviews

No customer reviews for the moment.

Write a review
5K Swivel® zinc-plated permanent anchor with mounting hardware for fall protection on steel structures.

5K Swivel® zinc-plated permanent anchor with mounting hardware for fall protection on steel structures.

Accessories

18 other products in the same category: