FPA823

5K Swivel® zinc-plated permanent anchor with mounting hardware for fall protection on concrete structures.

$125.00

5K Swivel® zinc plated permanent anchor with concrete mounting hardware for fall protection. The innovative swivel design provides 360° D-ring rotation to prevent accidental roll-out when in use. It also provides 180 ° flip to prevent accidental gate load. This anchor can support a weight of 310 lbs (141 kg), including clothing, tools and equipment. Sold individually.

According to the manufacturer, 5K Swivel® zinc-plated anchor has been designed to withstand a 5000 lbs (22 kN). This anchor meets all applicable OSHA and ANSI requirements: ANSI Z359.1-2007, ANSI Z359.7-2011, OSHA 1,926,502 and OSHA 1910.66.

A safe installation of this anchor requires a smooth surface made of concrete to allow a firm footing. Moreover, the concrete surface must be at least 7 in (178 mm) thick and resist to a minimum compressive strength of 3000 Psi (20.7 MPa). The anchor includes a 5K® concrete bolt with hexagonal head and a concrete sleeve anchor. For more information, please consult the specifications sheet and the instructions manual, available as PDF documents under the Download tab (English only).

Anchor weight: 1.2 Lb (0.5 Kg)

The user of this anchor must be aware of fall hazards surrounding him. Among other factors, is there an adequate fall clearance below the work area? Are there any obstacles in the way? Are there emergency measures in place to recover a fallen worker? These are all questions one must ask himself.

The worker is responsible for visually inspecting his fall protection equipment before each use. During this routine inspection, the worker must note any signs of degradation, malfunction, or breakage. Any anchor showing signs of wear and tear must be scrapped.

On top of this routine inspection, the anchor must be inspected by a qualified person different than the worker. These inspections should be performed more often if your equipment is used in extreme environmental working conditions.

Replace the anchor as soon as it has withstood an impact or arrested a fall. It is recommended to disassemble the anchor and to dispose of each part separately, so as to avoid accidental reuse of the anchor.

This anchor is supplied with a certification label wrapped around it.

Reviews

No customer reviews for the moment.

Write a review
5K Swivel® zinc-plated permanent anchor with mounting hardware for fall protection on concrete structures.

5K Swivel® zinc-plated permanent anchor with mounting hardware for fall protection on concrete structures.

Accessories

19 other products in the same category: