FPA831

Removable anchoring device for installation in a door or window frame, 310 lb max

$1,032.90

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Adjustable temporary anchor for doors and windows 21 1/2" to 51 1/2" wide. (54.6 cm to 130.8 cm). Withstands a static force of 5000 lb (22KN). The maximum weight of the worker who can use this anchor is 310 lb (140 kg), including clothing, tools, etc.

DBI Sala manufacturer code: 2100080, 3M number: 70007439592.
Meets the requirements of ANSI Z359.18 TYPE A and OSHA 1910.140.

This anchor installs in a door or window frame allowing the user to install an anchor connector quickly without having to damage anything. In addition, this anchor is lightweight, portable and does not require any tools for installation.

Anchor: Aluminum and zinc plated steel
D-ring: Carbon steel with galvanized finish
Capacity: 310 lb (140 kg)
Weight: 14 lb (6.3 kg)
Anchor length: 56.36 "
Anchor width: 7.12 "
Operating temperature: -40 F to 140 F (-40 C to + 60 C)
Equipped with an Isafe tag for tracking inspections.

Inspection:

The worker is responsible for performing a routine inspection before each use. During this routine inspection, the worker should observe any signs of degradation, wear, malfunction or breakage. You must replace your removable beam anchor at the first sign of failure mentioned above.

In addition, the removable beam anchor should be inspected by a qualified person other than the worker using the equipment. Keep in mind that the more difficult the work and environmental conditions, the more often you should inspect the removable anchor.
Sylprotec offers an inspection service for fall arrest equipment. You can find out more by visiting the Service tab under the Sylprotec logo at the top of the page.

Any equipment subject to a fall or impact must be taken out of service.

Caution: Must be installed at the bottom of the door or window opening.

Suggestion:

To complete your fall protection you will find a range of harnesslanyards and self-retracting lanyardsSome products are suggested under the "accessories" tab at the bottom of this page.

Other equipment frequently used with this safety harness:

Safety glasses YA12E91001
Liberty TA14LR safety helmet and the essential TA14CS chin strap
EPTCONE28B Traffic Cones
Peakworks FPBAG storage bag
The FPL9901 Tool Strap

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

Type of productSafety equipment
Main categoryPersonal protection
Sub categoryFall protection
Sub sub categoryAnchorage & connectors
Name of the productRemovable anchoring device
Product codeFPA831
Approved/CertifiedMeets the requirements of: ANSI Z359.18 TYPE A and OSHA 1910.140
Manufacturer3M
Country of originUnited State of America
ReusableReusable with careful inspection and proper installation
Recommended use temperatureOperating temperature -40°F to 140°F /-40°C to 60°C
FeaturesFor door and window widths from 21 ½" to 51 ½ / 54.6 cm to 130.8 cm
Characteristic adding safetyMinimum breaking strength: 3,600 lb
Comfort featuresLightweight and portable and easy to install by one person
IncludesWith D-ring
Worker’s weight310 lb / 140 Kg maximum
Material1Galvanized steel
Material2Aluminum
WashableHand wash with warm water and soap
Length (in/cm)22 in / 55.88 cm
Width (in/cm)8.5 in / 21.6 cm
Height (in/cm)3.25 in / 8.25 cm
Weight (lb/kg)7.6 lb / 3.5 Kg
Sold byUnit
ColorGrey/Black
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
CautionThe maximum weight supported is 310 lb / 141 kg, which includes the weight of tools and any other equipment carried by the worker

Accessories

16 other products in the same category: