Concrete anchor strap 42 in. (1m) from Protectra, 420 lb max, 25 units

More info
Data sheet

Protectra® Pro® brand temporary concrete anchor connector made of abrasion resistant polyester. Maximum worker weight for this anchor is 420 lb (190 kg), including clothing, tools, etc. Sold in packs of 25.

Protectra® Pro® manufacturer code: 2190063.

No certification at this time for this product other than the one mentioned with OSHA by the manufacturer.

42" long concrete anchor strap. (1m).
Loop slips over rebar for quick installation.
Durable polyester construction.
Made of abrasion resistant polyester.
Fabric loop allows connection to a carabiner or fall arrest system.
Compact and lightweight design.
Temporary anchor that is cut off at the end of the work.

Depending on the use of the anchor connector is installed on the concrete rods before pouring. They are then used to anchor workers near the edge of the building. When all work involving a fall hazard is completed, they are cut. According to the manufacturer, these straps can support a load of 5,000 lbs. (22kN) or meet the OSHA criteria of a 2 to 1 safety factor.

Suggestion:

To complete your fall protection you will find a range of harness, lanyards and self-retracting lanyards. Some products are suggested under the "accessories" tab at the bottom of this page.

Other equipment frequently used with this safety harness:

Safety glasses YA12E91001
Liberty TA14LR safety helmet and the essential TA14CS chin strap
EPTCONE28B Traffic Cones
Peakworks FPBAG storage bag
The FPL9901 Tool Strap

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

Type of product	Safety equipment
Main category	Personal protection
Sub category	Fall protection
Sub sub category	Anchorage & connectors
Name of the product	Mooring strap
Product code	FP2190063
Approved/Certified	No certification at present for this product other than the one mentioned with OSHA by the manufacturer
Manufacturer	3M
Country of origin	Unknown origin
Format	42 in / 1 m
Maintenance free	Cutting at the end of the work
Features	Depending on the use of the anchor connector is installed on the concrete rods before pouring. They are then used to anchor workers near the edge of the building. When all work involving a fall hazard is completed, they are cut
Characteristic adding safety	Designed to withstand static forces of 5000 lbs (22 KN)
Worker’s weight	420 lb / 190.5 kg maximum
Material	Polyester
Washable	Wash in warm water, 98.60°F/ 37°C. Never use bleach or other abrasive or chemical products on your strap. Air dry
Length (in/cm)	6 in / 15.24 cm
Width (in/cm)	6 in / 15.24 cm
Height (in/cm)	3 in / 7.6 cm
Weight (lb/kg)	3 lb / 1.4 Kg
Sold by	Unit
Color	Black/Red
Another packaging available	Case of 25 units
Return conditions	No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
Caution	The maximum weight supported is 420 lb / 190.5 kg, including clothing, tools, etc.