SAH11

RAPTOR two speed axial air mover for intensive work. Low speed of 1300 cfm & high speed of 1950 cfm. Normal amps of 2.3 to 2.8 A

$507.50

RAPTOR® two speed axial air mover for intensive work. This particular model of air mover may be positioned in an angle with the proper stand which is sold separately. It is also energy-efficient, lightweight and easy to clean.

This air mover has been designed for disaster recovery work. It features two operating speeds, that is, the low speed at 1300 cfm and the high speed at 1950 cfm. This type of device is usually used in conjunction with dehumidifiers. The way it works is that the air mover shuffles the air inside the outskirts of the work zone which feeds the dehumidifier at the same time by a centrifugal effect. This RAPTOR® air mover is powerful enough to dry materials under a carpeted floor, for example, if the carpet fabric is porous enough to let air get through.

This air mover is certified UL to comply with flammability requirements set by the responsible authorities. This air scrubber is also certified ETL and meets CSA requirements as for safety standards. This equipment minimal power supply requirement is 120V/60 Hz. Its normal operating amps is 2.3 A at low speed and 2.8 A at high speed which allows one to daisy-chain up to four units on one 15 A circuit.

The RAPTOR® molded body is made of unique resin which contains (United States Environmental Protection Agency) EPA-registered microbial growth inhibitors, and is as well UV-resistant. It has been design for daisy-chaining. Moreover, the dual receptacle on the dashboard is protected with a 10 A ground-fault circuit interrupter (GFCI). The dashboard is equipped with an hour meter. This device is equipped with 6 fan blades for optimal results, a 25 in long power cord and a cable reel.

When activated, this model of air mover generates 72 dBA on high speed and 70 dBA on low speed. It also weighs a total of 34 lb (15.42 kg) and features an ergonomic handle as well as rubber tips to prevent the juddering of your equipment.

Unit dimensions:
Length, 22 in X Depth, 22 in X Height, 15 5/8 in
(Length, 55.88 cm X Depth, 55.88 cm X Height, 39.69 cm)

Please note that this equipment is not intrinsically safe. Please contact our customer service for more information.

Type of product Safety equipment
Main category Industrial accessoiries
Sub category Asbestos decontamination
Name of the product RAPTOR 2-speed axial fan
Product code SAH11
Operating flow rate 1300 cfm to 1950 cfm
Power supply requirements 120 volts AC, 60 Hz
Normal operating amps 2.3 A at low speed and 2.8 A at high speed
Operational sound level 72 dBA on high speed and 70 dBA on low speed
Height (in/cm) 15.6 in / 39.69 cm
Length (in/cm) 22 in / 55.88 cm
Width (in/cm) 22 in / 55.88 cm
Weight (lb/kg) 34 lbs / 15.42 Kg

Reviews

No customer reviews for the moment.

Write a review
RAPTOR two speed axial air mover for intensive work. Low speed of 1300 cfm & high speed of 1950 cfm. Normal amps of 2.3 to 2.8 A

RAPTOR two speed axial air mover for intensive work. Low speed of 1300 cfm & high speed of 1950 cfm. Normal amps of 2.3 to 2.8 A

Accessories

30 other products in the same category: