compare_arrows
Second stage filter for HEPA-AIRE (SAH5). 18"X24"X2" filter for particles 3 µm to 10 µm
search
  • Second stage filter for HEPA-AIRE (SAH5). 18"X24"X2" filter for particles 3 µm to 10 µm
  • Second stage filter for HEPA-AIRE (SAH5). 18"X24"X2" filter for particles 3 µm to 10 µm
  • Second stage filter for HEPA-AIRE (SAH5). 18"X24"X2" filter for particles 3 µm to 10 µm
  • Second stage filter for HEPA-AIRE (SAH5). 18"X24"X2" filter for particles 3 µm to 10 µm
  • Second stage filter for HEPA-AIRE (SAH5). 18"X24"X2" filter for particles 3 µm to 10 µm
  • Second stage filter for HEPA-AIRE (SAH5). 18"X24"X2" filter for particles 3 µm to 10 µm

Second stage filter for HEPA-AIRE (SAH5). 18"X24"X2" filter for particles 3 µm to 10 µm

SAH5FS
$123.70
Quantity

Compare
Return conditions:

No returnable if used. For more information about our return policy, please refer to the Orders and Returns.

Secondary filter for the HEPA-AIRE (SAH5) or any other model of air scrubber which requires a 18 in X 24 in X 2 in filters. Sold by the pack of 12 filters.

This second stage filter captures particles 3 µm to 10 µm such as mold spores, hair spray, fabric protector, dusting aids, cement dust, etc. This filter is the second stage of an air scrubber’s filtration system. It has been designed to capture particles between the sizes of 3 to 10 µm and to let the smaller travel through to be filtered by the HEPA filter. It is recommended to replace the secondary filter every 72 hours to 3 months depending on the concentrations in which the contaminants are found or whenever the machine emits a signal.

This blend of cotton and polyester filter is disposable and has been designed to extend the life of the HEPA filter.

This filter has been listed as UL900 class 2 for its smoke emission and flammability limits. This filter has also a MERV 6 rating (Minimum Efficiency Reporting Value) according to the measuring scale to rate the effectiveness of air filters set by the ASHRAE (American Society of Heating, Refrigerating and Air Condition). A rate 6 means the effectiveness of this filter turns around the capture of 90% of the particles between 3 and 10 µm. 

Please note that once the packaging has been opened, we cannot accept returns or exchanges.

SAH5FS

Data sheet

Type of product
Safety equipment
Main category
Industrial accessories
Sub category
Asbestos decontamination
Name of the product
Filtre for air purifier
Product code
SAH5FS
Sort by keywords
Air cleaners and accessories
Product use
Air cleaners and accessories
Maintenance free
Disposable product
Secundary filter capacity
Capture of 90% of the particles between 3 µm and 10 µm.
Secundary filter dimensions
18 po X 24 po X 2 po
Time of use
It is recommended to replace every 72 hours to 3 months depending on the concentrations in which the contaminants are found
Length (in/cm)
24 in / 60.9 cm
Width (in/cm)
23 in / 58.42 cm
Height (in/cm)
18 in / 45.72 cm
Weight (lb/kg)
15 lb / 6.80 Kg
Sold by
1 pack (12 units)
Return conditions
No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
New

You might also like