SAH5FSOV

Second stage optional filter for organic vapours on HEPA-AIREair (SAH5) 18"X 24"X 2" filter for particles 3 to 10 µm

$75.95

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Second stage optional filter for organic vapours for the HEPA-AIRE (SAH5) or any other model of air scrubber which requires a 18 in X 24 in X 2 in filters. Sold individually. Case of 6 filters. 

This second stage filter captures particles 3 to 10 µm such as mold spores, hair spray, fabric protector, dusting aids, cement dust, etc., as well as organic vapours in low concentrations. This filter is the second stage of an air scrubber’s filtration system. It has been designed to capture particles between the sizes of 3 to 10 µm and to let the smaller travel through to be filtered by the HEPA filter. This filter features the Vapor-Lock® technology which causes a surface phenomenon by which the molecules of organic vapours will adhere to the activated charcoal surface of the filter; this is what we call adsorption. It is recommended to replace the secondary filter every 72 hours to 3 months depending on the concentrations in which the contaminants are found. Please note that the machine will not emit a signal once the charcoal filter is saturated; it is by the smell that we know it’s time to change the Vapor-Lock® filter.

This blend of cotton and polyester filter is disposable and has been designed to extend the life of the HEPA filter.

This filter has been listed as UL900 class 2 for its smoke emission and flammability limits. This filter has also a MERV 6 rating (Minimum Efficiency Reporting Value) according to the measuring scale to rate the effectiveness of air filters set by the ASHRAE (American Society of Heating, Refrigerating and Air Condition). A rate 6 means the effectiveness of this filter turns around the capture of 90% of the particles between 3 and 10 µm. 

Please note that we don’t keep this particular item in stock. To get this item, please place a special order and be aware that no returns or exchange will be accepted for this item.

Type of productSafety equipment
Main categoryIndustrial accessoiries
Sub categoryAsbestos decontamination
Name of the productFiltre for air purifier
Product codeSAH5FSOV
Maintenance freeDisposable product
Optional secondary filter capacityCapture of 90% of the particles between 3 µm and 10 µm.
Optional secondary filter dimensions18 in X 24 in X 2 in
Time of useIt is recommended to replace every 72 hours to 3 months depending on the concentrations in which the contaminants are found
Length (in/cm)24 in / 60.9 cm
Width (in/cm)18 in / 45.72 cm
Height (in/cm)2 in / 5.08 cm
Weight (lb/kg)3 lb / 1.4 Kg
Sold byUnit
Another packaging available16 units by case
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Accessories

30 other products in the same category: