G913

Water-Tite® split-leather winter glove lined with Thinsulate™ & a waterproof polyurethane sheet. Sold in pairs.

$10.55

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page.

Water-Tite® split-leather winter glove lined with Thinsulate™ and a waterproof polyurethane sheet. Sold in pairs.

Superior manufacturer’s code: 66BFTLWT

These gloves are available in sizes ranging from large (9) to extra-large (10). Please select the size needed in the field located above.

G913 peculiarities:
This glove has the special feature of being lined with polyurethane. This liner is located under the leather layer to waterproof the glove from the tips of the fingers to the wrist on the palmar side of the hand. It also features a Gunn cut which is quite popular among workers since most seams are sewn on the top of the hand which allows a better resistance to abrasion, wear and tear. The leather part covers all the inside of the hand from the tips of the fingers to the wrist as well as on the joints by a large strip.

Side-split leather properties:
Side-split leather comes from the slitting of thicker hides in two sheets: the surface of the skin, the finest part known as ‘full grain’ is the real leather as opposed to the subsurface, known as split-leather. Split-leather is quite resistant to abrasion, but thicker and may feature a more raw aspect and irregularities.

Thinsulate™ properties:
Thinsulate™ is a unique material made of microfibers which insulates by trapping air molecules between the skin and the outside of the protective clothing. Indeed, the key to the right insulation is air pockets and the more air a material traps in a given space‚ the better it insulates you from the cold outside air. It’s quite easy: when the body sweats, water molecules in gaseous form and heat are liberated. That heat pushes by conduction the water molecules out of the Thinsulate™ lining, thus out of the protective gear. This is how Thinsulate™ is breathable, non-absorbent and easily washable. Thinsulate™ is considered to be the best insulating material with a 9/10 score. It is moreover the most compact insulation to this day which provides an excellent dexterity compared to other insulating materials. Thinsulate™ is the number 1 choice for workers in extreme and cold conditions.

Use for:
This glove are recommended for workers in refrigerated warehouses, on construction sites in winter conditions, for agriculture and ranching activities, to handle parts that may be cold, for general maintenance and for forklifting. 

Do not use for:
Of course, this glove offers no sure protection against frostbites, cuts, wear, tear and puncture so mechanical risks should not be overlooked.

Maintenance and service life:
It is not recommended to wash this glove since water and soap tend to rob leather of its natural oils which makes it stiffen and become brittle. If the nature of your work requires that you wash them, we recommend that you dry clean them.

Type of product Safety equipment
Main category Personal protection
Sub category Gloves
Sub sub category Cold-resistant gloves
Name of the product Winter glove
Series of products Endura™
Product code G913
Approved/Certified ANSI 3 puncture
Manufacturer Superior gloves®
Choice of format Size large (9) to double extra-large (11) available
Reusable Reusable with prior hygienic measurement
Internal palmar surface of the hand Equipped with a waterproof polyurethane film between the leather and the insulating lining
Type of glove cut Fitter style glove
Inside of the glove Double thinsulate (Tm) lining
type of cuff Safety cuffs
Not washable It is preferable to replace this glove when it is too worn or soiled. Do not attempt to wash them
Additional Features Large opening cuff made of split cowhide leather
Material1 Split-leather
Material2 Cotton
Material3 Polyurethane
Height (in/cm) 1.5 in / 3.81 cm
Length (in/cm) 10.5 in / 26.67 cm
Width (in/cm) 6 in / 15.24 cm
Weight (lb/kg) 0.7 lb / 0.3 Kg
Color Blue/Yellow
Recommended use temperature Protection against cold up to -4°F (-20°C)
Sold by Pair
Another packaging available1 By the dozen (12 pairs)
Return conditions No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page.

Reviews

No customer reviews for the moment.

Write a review
Water-Tite® split-leather winter glove lined with Thinsulate™ & a waterproof polyurethane sheet. Sold in pairs.

Water-Tite® split-leather winter glove lined with Thinsulate™ & a waterproof polyurethane sheet. Sold in pairs.

Accessories

14 other products in the same category: