3M N95 NIOSH 42 CFR 84 approved particulate respirator for protection from airborne particles. Sold per box of 20 units, 8 boxes/case.
This respirator is made of a patented electrostatically charged microfiber that makes breathing easier and cooler. It is certified N95 which means it protects the user from 95% of particles in the air. The letter "N" stands for "non-resitant", thus the membrane doesn’t protect one from oil based particles, but protects from solid, liquid and biological airborne contaminants.
The 8210 respirator features fixed straps braided and fixing points without staples and a flexible foam coated nosepiece which allow a better impermeability without putting aside comfort. It does not contain natural rubber latex. Made in the USA.
This type of respirator offers a basic protection and eases the wearing of safety glasses.
This product is made for short term work in a controlled environment. It is design for grinding, sanding, sweeping, bagging, woodworking, foundries and other dusty operations. It can be used for protection from processing minerals, coal, iron ore, flour and other dusty substances, and non-oil based liquids and sprays that do not emit harmful vapours. NIOSH certified respirators (N95, N100, R95, R100, P95 and P100) protect one from silica, the second main cause of chronic respiratory problems after asbestos.
This respirator can help prevent the inhalation of certain airborne biological particles like mold, Bacillus anthracis (Anthrax), Mycobacterium tuberculosis (Tubercle bacillus Koch) the main causative agent of tuberculosis, pandemic flues (H5N1, H1N1), etc. It is by far the most used respirator when a pandemic occurs. However, it cannot eliminate the risk of contracting infection, illness or disease. Combined with hygiene and protection measures, this respirator turns out to be an efficient equipment to reduce the spread of infectious diseases. Due to the nature of some contaminants, the exposure limit value of some products and byproducts haven’t been quantified by governmental agencies, thus wearing a respirator doesn’t necessarily protects you.
Do not use for:
Do not use on a beard and other facial hair or if the user suffers from a condition that prevents him from having direct contact with the respirator’s sides. The use of respirators is not recommended to people with compromised respiratory system such as asthma or emphysema. It is strongly discouraged to wear a respirator for application with oil based spray, brush painting, gases, vapours, asbestos and sandblasting. It is also highly advised to stay away from environment that exceed 10 times the permissible exposure limit set by the CNESST or any other government regulation applicable.One should never use a respirator in an oxygen deprived environment (an atmosphere with less than 19,5 % oxygen).
Whenever the respirator is well adjust and a qualitative fit test is successful, this respirator meets ANSI Z92.2-1992 standards, that is, a protection factor of 10. This factor means that the worker can be exposed to a concentration 10 times higher than the exposure limit when not protected. If needed, please contact customer service for more information.
Maintenance and service life:
No maintenance is needed since this respirator is disposable. It has been design for an approximate service life of 8 hours. That number is in no way a reference since every work environments is different. The manufacturer’s limitations must be followed.
A smaller size is also available (R8110S) in the menu at the bottom of the page.
|Type of product||Safety equipment|
|Main category||Personal protection|
|Sub category||Respiratory protection|
|Sub sub category||Disposable masks|
|Name of the product||N95 Disposable respirator|
|Series of products||3M (Tm) Disposable respirator|
|Approved/Certified||Meets NIOSH N95|
|FDA approved||None approved for FDA (USA)|
|Country of origin||United State of America|
|Features||Foam nose band|
|Moisture resistant||Not recommended for hot and humid environments|
|Maintenance free||Discard if damaged, contaminated, dirty or worn|
|Respirator size||Medium/Large size|
|Includes natural rubber latex components||Does not contain latex|
|Compatibility with the mask screen used for welding||Not compatible with the mask screen used for welding|
|Contains a braided strap for comfort||Contains a braided strap (large)|
|Contains adjustable buckle straps||Does not contain an adjustable buckle|
|Exhalation valve||Does not contain exhalation valve|
|Protection factor||Protection factor of 10|
|Flame resistance (ASTM D2859-96)||Not flame resistant|
|Protection against gases and vapors||Does not protect against odour relief|
|Respirator Style||Cup-shaped respirator|
|M-nose clip||Does not contain an M-shaped nose clip|
|Material||Advanced electrostatic material|
|Height (in/cm)||5 in / 12.7 cm|
|Length (in/cm)||8 in / 20.32 cm|
|Width (in/cm)||5.75 in / 14.6 cm|
|Weight (lb/kg)||1 lb/ 0.45 Kg|
|Sold by||Boxes of 20 units|
|Another packaging available1||8 box per case|
|Another packaging available2||160 units per case (6400 units per pallet)|
|Useful life||1825 Days|
|Return conditions||No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page.|
No customer reviews for the moment.