11 in long side-split & full grain leather welding glove with wing thumb & leather-welts.

$9.25

Please select the available option below :

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Side-split cowhide and full grain leather welding glove of a total length of 11 in (28 cm). Sold in pairs.

These gloves are available in sizes ranging from medium (8) to two extra-large (11). Please select the size needed in the field located above.

G605 peculiarities:
This glove is made of side-split leather around the wrists and full grain cowhide on the palmar side as well as on the back side of the hand. It features a wing thumb which is an angled construction with no seams on the palm side to obstruct work or cause fatigue, all this to allow a better flexibility. This one-piece back glove provides an excellent protection against brands which could land on a burnt seam since there are no seams to burn. Seams located in critical places are leather-welted better durability. Not only do these gloves protect your hands from temperatures up to 350°F (175°C), but they also protect much of your forearm.

Side-split leather properties:
Side-split leather comes from the slitting of thicker hides in two sheets: the surface of the skin, the finest part known as ‘full grain’ is the real leather as opposed to the subsurface, known as split-leather. Split-leather is quite resistant to abrasion, but thicker and may feature a more raw aspect and irregularities.

Cowgrain properties:
The grain, in this case, cowgrain, comes from the slitting of thicker hides in two sheets: the surface of the skin, the finest part known as ‘full grain’ is the real leather as opposed to the subsurface, known as split-leather. Cowgrain is mainly the most popular leather on the market since cowhide strikes a good balance of durability, dexterity, abrasion resistance, and comfort besides being quite cost-efficient.

Use for:
These gloves are recommended for light welding applications, but won’t measure up to jobs such as work in smelting plants and steel mills.

Do not use for:
It is not recommended to immerse this mitt in water or any other liquid brought to boil since their fabric only offers a limited protection against heat conduction. Even though leather provides quite a good protection against heat, it does not rule out the risk of burns or any other mechanical hazards.

Maintenance and service life:
It is not recommended to wash this glove since water and soap tend to rob leather of its natural oils which makes it stiffen and become brittle. If the nature of your work requires that you wash them, we recommend that you dry clean them.

Type of productSafety equipment
Main categoryPersonal protection
Sub categoryGloves
Sub sub categoryHeat-resistant gloves
Name of the productWelding glove
Series of productsEndura™
Product codeG605
Approved/CertifiedANSI 3 puncture
ManufacturerSuperior gloves
Palmar surface of the hand and index fingerMade of full grain cowhide
Type of glove cutFitter style glove
Choice of formatSize small (7) to double extra-large (11) available
ReusableReusable with prior hygienic measurement
Additional FeaturesLarge opening cuff made of split cowhide leather
Material1Split-leather
Material2Cowgrain leather
Not washableIt is preferable to replace this glove when it is too worn or soiled. Do not attempt to wash them
Length (in/cm)12 in / 30.48 cm
Width (in/cm)6 in / 15.24 cm
Height (in/cm)0.5 in / 1.27 cm
Weight (lb/kg)0.3 lb / 0.1 Kg
Sold byPair
ColorBeige/Grey
Another packaging available1By the dozen (12 pairs)
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Accessories

13 other products in the same category: