This product is no longer in stock
Item in liquidation, 2x 2XL + 1x 3XL still available.
Waterproof and windproof hi-viz yellow raincoat with silver retroreflective stripes. This coat meets the CSA Z96-09, Class 2, Level 2 standard requirements if worn alone, and Class 3 standard requirements if worn with matching high-visibility waterproof safety pants (see item VP218).
This coat is available in many sizes from small (S) to five extra large (5XL). Select your size in the drop-down menu above.
Need pants as well? See item VP218 under “Accessories” at the bottom of the page.
This 300-denier oxford polyester safety wear has been lined with polyurethane (PU) to provide water-resistance. The manufacturer was unable to provide further information on the waterproof rating of his product. All seams have been taped and heat-sealed. The inner part of the coat has been entirely lined with a comfortable mesh fabric. The sleeves, however, are lined with a thin layer of polyester.
It is recommended for any worker surrounded by motorized vehicles: school crossing guards, drivers, transport workers, etc.
Reflective stripes and visibility:
This water-resistant coat has been provided with silver retroreflective stripes, each one measuring 50 mm (2 in.) in width. This raincoat has two stripes at the waist, back X-shaped stripes, and two stripes around each arm.
Fluorescent yellow (or that safety greenish yellow) is quite visible during daylight and in poor natural light conditions, e.g. at dawn or dusk. In most cases, this yellow ensures a high contrast with most backgrounds. Since bright yellow is lighter than orange, it can be perceived more easily at night, yet reflective stripes will always be best in the dark.
Silver retroreflective stripes are the most visible there is in poor lighting conditions, be it natural or
This polyester coat offers some resistance to abrasion. The wide style of this coat allows one to easily wear warm clothes underneath while still allowing a good airflow. It features two small vents which are flap-protected. Each sleeve is equipped with a fit Spandex™ and polyester cuff to prevent rain to enter through wrist openings. They are also equipped with hook and loop fasteners on the wrist to ensure a fit adjustment. The hood may be adjusted with a stretchable cord. It may be removed and snapped on again as needed.
This raincoat closes at the front with a double slider plastic zipper which is protected by a hook and loop sealed flap. This rainwear also features two big flap-protected pockets, a press stud sealed see-through pocket to hold ID cards, and a hidden pocket that closes with a zipper. All seams have been taped and heat-sealed. This coat is not flame-resistant.
This PU lined oxford polyester raincoat is said to be manufactured with a 300-deniers yarn; in layman’s terms, it is a medium-weight coat which is lightweight enough to offer comfort but is heavyweight enough to offer an effective protection. By definition, 300 deniers refer to the weight in grams of 9,000 m of the yarn used to make this coat, that is, 300 deniers equal 300 g. The manufacturer is unable to provide the polyurethane liner’s thickness.
Polyurethane-lined waterproof safety wear is usually worn by workers who may be exposed to remote risks of chemical splashes. PU is lightweight and porous; it’s thus ideal to manufacture light and breathable workwear. The manufacturer is unable to provide information on this raincoat resistance to hydrostatic pressure. Upon examination and comparison to similar products, we assume that this coat can withhold a hydrostatic pressure of about 5,000 mm, i.e. it can withstand the pressure of a 5 m water column. A waterproof rating is granted when a material has been tested under the pressure of a cylinder filled with water, in this case, 5 m high of water. This height defines the limit at which the material stops being resistant and water starts passing through. PU is lightweight and porous; it’s thus ideal to manufacture light and breathable workwear. Yet, during heavy rains and windstorms, PU tends to get waterlogged and lose all its water-resistant property. Once overloaded, polyurethane lets water leach into the raincoat under any pressure, e.g. by leaning on something or bending over.
This raincoat should always be machine-washed in a delicate setting with cold or lukewarm water, and a gentle soap. Never use bleaching agents or fabric softeners on this coat. It should also be air-dried in a sheltered spot out of direct sunlight. Never tumble dry, iron or dry clean this raincoat.
|Type of product||Safety equipment|
|Main category||Personal protection|
|Sub category||Safety clothing|
|Sub sub category||Rainwear & rain gear|
|Name of the product||High visibility waterproof coat|
|Approved/Certified||Meets CSA Z96-15, Class 2, Level 2|
|Country of origin||China|
|Fineness of the knitting||300 deniers|
|Flame Resistance||No Flame resistant|
|Choice of format||Size small (S) to 5 extra-large (5XL) available|
|Reusable||Reusable with prior hygienic measurement|
|Features||With silver reflective stripes of 2 in / 50 mm wide (2 vertical stripes on front, 2 crossed X stripes on back, 1 horizontal stripe on waist and 1 stripe around the elbows|
|Additional Features||The sleeves are each fitted with an elastane Spandex(Tm) and polyester cuff to keep rain out of the sleeves, and have Velcro® closures to adjust the opening width|
|Comfort features||he jacket closes with a double slider plastic zipper, which is protected by a Velcro® flap|
|Precision on the color of the material and their visibilities||Fluorescent yellow (safety yellow-green) is highly visible during the day and in conditions with little natural light, such as dawn and dusk. In most situations, it also provides high contrast with the background|
|Waterproof rating||The manufacturer grants this product a waterproof rating of 5000 mm. All seams have been taped and heat-sealed|
|Includes||Equipped with two small ventilation openings protected by flaps and 4 pockets (2 large flap pockets, 1 clear pocket with snap closure to hold ID cards and 1 hidden zippered pocket)|
|Includes 2||A detachable hood that adjusts with an elastic cord. It can be easily removed and put back on thanks to the snaps on the collar of the coat|
|Material1||Woven polyester in oxford pattern|
|Washable||Machine wash with mild soap and hang to dry out of the sun. DO NOT PUT IN THE DRYER.|
|Dimensions of the product||The dimensions of the product depend on the size selected by the customer.|
|Length (in/cm)||13 in / 33 cm|
|Width (in/cm)||10 in / 25.4 cm|
|Height (in/cm)||2 in / 5.08 cm|
|Weight (lb/kg)||2 lb / 0.9 Kg|
|Return conditions||No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page|