HEPA exhaust filter element 0.3 micron RA9806, RA9821 and RA9832 Allegro low pressure ambient air pumps.

Discover the Allegro HEPA 0.3 micron outlet filter.

The Allegro HEPA filter is designed to provide impeccable air quality in demanding environments. Compatible with pumps model RA9806 (A300), RA9821 (A750) and RA9832 (A1500), it retains ultrafine contaminants thanks to its 0.3 micron filtration technology.

This respiratory filter is an essential investment for health and safety in industrial environments.

Particularities of the Allegro HEPA filter for pumps RA9806, RA9821 and RA9832

The Allegro HEPA filter stands out for its efficiency and perfect compatibility with low-pressure ambient air pumps. Its ability to eliminate ultrafine particles makes it an indispensable accessory for supplied-air respirators. Its robustness and reliability guarantee prolonged and secure use.

Installation of the Allegro HEPA 0.3 micron filter on low-pressure air pump

Installing the Allegro HEPA filter is simple and quick. It attaches directly to the outlet of pumps model RA9806 (A300), RA9821 (A750) and RA9832 (A1500). Proper installation ensures optimal filtration and immediate respiratory protection, without requiring complex tools.

Maintenance of the Allegro HEPA filter for industrial respirators

To maintain constant performance, it is recommended to regularly check the condition of the Allegro HEPA filter and replace it as soon as it is saturated. Rigorous maintenance ensures effective filtration and prolonged service life of the respiratory system.

Usage tips for the Allegro HEPA 0.3 micron filter

The Allegro HEPA filter must be used in environments where air quality is critical. Make sure the ambient air pump is properly maintained and that the filter is installed according to the manufacturer’s recommendations. These precautions guarantee optimal respiratory safety and lasting protection against fine particles.

FAQ about the Allegro HEPA filter for pumps RA9806, RA9821 and RA9832

What is the efficiency of the Allegro HEPA 0.3 micron filter?

 It retains ultrafine particles up to 0.3 micron, offering maximum respiratory protection.

Is this HEPA filter compatible with all Allegro pumps?

 It is specifically designed for models model RA9806 (A300), RA9821 (A750) and RA9832 (A1500), guaranteeing perfect compatibility.

When should the Allegro HEPA filter be replaced?

 The Allegro manufacturer recommends replacing the filters after 200 hours of use.

Complementary filter suggestion:

We suggest replacing the exhaust filter element (RA9700-02) at the same time since the replacement period is the same. Do not forget to replace the carbon fins around 400 to 500 hours of use see item (RA9700-41S).

Please note that this item is only available on special order, supply may vary from 2 to 3 weeks.