8 gal(US)/30L vacuum bags for HEPA-AIRE industrial canister vacuum cleaner. Ideal for asbestos abatement & decontamination

Bags for industrial HEPA vacuum cleaner: efficiency and safety for decontamination work.

8 gal (US) (30 L) vacuum bags for HEPA-AIRE® (SAD6) industrial canister vacuum cleaner by Abatement Technologies. Sold by the pack of 5 units.

These bags for industrial HEPA vacuum cleaner are specially designed to meet the requirements of asbestos removal sites. Thanks to their 8 gal US capacity, they can contain asbestos dust, non-flammable liquids, and wet waste without risk of dispersion. Their robust design helps reduce worker exposure to contaminants while facilitating the management of hazardous waste.

The reliable solution for asbestos removal and decontamination.

Features of the 8 gal US bags for industrial canister HEPA vacuum cleaner:

SAD6S bags are sold in packs of five units and measure approximately 19 inches long, 12 inches wide, and 1 inch high. Their 30.28-liter capacity allows efficient collection of waste generated during decontamination work. Made to fit perfectly with HEPA-AIRE vacuum cleaners, these bags are non-returnable once used, ensuring their integrity and compliance with safety standards.

Please note that once the packaging has been opened, we cannot accept returns or exchanges.

Installing the bags for HEPA-AIRE industrial vacuum cleaner:

Installing the 8 gal US bags in a HEPA-AIRE industrial canister vacuum cleaner is simple. Just open the tank compartment, insert the bag into the designated slot, then close the lid tightly. Make sure the bag is properly positioned to prevent any leakage of dust or liquid during use.

Maintaining the bags for industrial HEPA vacuum cleaner:

The bags for HEPA vacuum cleaner do not require specific maintenance but must be replaced as soon as they are full or damaged. It is recommended to regularly check their fill level and handle them carefully during removal to avoid any dispersion of contaminants. The vacuum tank can be cleaned with a damp cloth after removing the bag.

Usage tips for the 8 gal US bags for asbestos removal and decontamination:

Use these bags exclusively with compatible industrial HEPA vacuum cleaners to ensure optimal filtration. Do not exceed the maximum capacity of 30 liters and avoid collecting flammable or corrosive substances. During asbestos removal work, make sure to seal the bag properly after use and dispose of it in accordance with current hazardous waste regulations.

FAQ about the bags for HEPA-AIRE industrial canister vacuum cleaner:

What is the exact capacity of the bags for HEPA-AIRE industrial vacuum cleaner?

Each bag has a capacity of 8 gal US, or approximately 30.28 liters, allowing safe collection of dry and wet waste.

Are these bags compatible with all industrial HEPA vacuum cleaners?

They are specifically designed for HEPA-AIRE industrial canister vacuum cleaners. Use with other models is not guaranteed.

Can the bags be reused after use?

No, the bags are non-returnable and must not be reused. They are designed for single use to ensure safety and effective decontamination.

Additional suggestions for the bags for HEPA-AIRE industrial canister vacuum cleaner SAD6S:

Need additional safety equipment? See the articles; Safety hard hat (TA14LR), Omega II minor hard hat type 1 (TA14FS), motorized respirator with 1000 protection factors (R6800PF), 3M  mask protection film (R6885).

Under "Accessories" at the bottom of the page. If you're looking for work equipment, have a look at the following products: White antistatic coveralls with (V51), containment fabric (SACTT2) or (SAH2MA) air cleaners.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.