Universal dust sensor for reciprocating saw


Universal dust sensor compatible with most brands and models of reciprocating saws. This dust sensor must be used with a HEPA vacuum cleaner. Once assembled, the HEPA vacuum sucks dust as the hole is drilled, thus avoiding the dispersion of dust in the air.

This type of dust collector is normally used when working with products containing or likely to contain asbestos. It is about low risk work. It prevents the dispersion of asbestos fibers and reduces the time required for decontamination.

It is often used during work in the presence of low risk asbestos.

Note that during asbestos removal work, you will need a proper HEPA vacuum for asbestos removal work. HEPA vacuums should, among other things, have passed a DOP test.

Type of productSafety equipment
Main categoryIndustrial accessoiries
Sub categoryAsbestos decontamination
Name of the productUniversal dust collector for reciprocating saws
Product codeSAH18
Length (in/cm)16 in / 40.6 cm
Width (in/cm)10.50 in / 26.67 cm
Height (in/cm)9 in / 22.9 cm
Weight (lb/kg)2.3 lb / 1 Kg

30 other products in the same category: