compare_arrows

Master Lock S806CBL adjustable cable lockout 3, 10 and 15 ft

Reference : CACCS806CBL-3
$53.10

This item is not stocked: allow 5 to 7 days for delivery.

Gray Master Lock S806CBL adjustable cable lockout, offered with a 3, 10 or 15 ft cable. The 3 ft cable suits closely spaced isolation points, the 10 ft cable reaches a more distant part and the 15 ft cable offers the longest reach. It pulls tight, resists chemicals and takes up to 4 padlocks. Choose your length in the format table. Sold individually, padlocks not included.

Cable length: 3 ft
Quantity

Compare

Master Lock S806CBL adjustable cable lockout 3, 10 and 15 ft

Offered with a 3, 10 or 15 ft cable; choose your length in the format table below.

This item is not stocked: allow 5 to 7 days for delivery.

FormatSylprotec codeManufacturer modelProduct weight
3 ftCACCS806CBL-3S806CBL30.3 lb (0.136 kg)
10 ftCACCS806CBL-10S806CBL100.46 lb (0.209 kg)
15 ftCACCS806CBL-15S806CBL150.6 lb (0.272 kg)

When the point being secured is within easy reach, a short cable avoids extra slack to manage; when it is farther away or the cable must go around bulky equipment, a longer cable gives the reach you need. All three formats pull tight, and up to 4 people can apply their padlocks.

Features of the S806CBL adjustable cable

  • Adjustable pull-tight cable.
  • Chemical resistance.
  • 3 ft (0.914 m), 10 ft (3.048 m) or 15 ft (4.572 m) cable.
  • Takes up to 4 padlocks.
  • Steel, thermoplastic and plastic, gray.
FeatureDetail
ManufacturerMaster Lock
MaterialsSteel, thermoplastic and plastic
Cable length3 ft (0.914 m), 10 ft (3.048 m) or 15 ft (4.572 m)
Number of padlocksUp to 4
Body height, 3 ft cable2.69 in (6.83 cm)
Body length, 3 ft cable2.875 in (7.30 cm)
Body width, 3 ft cable1.09 in (2.77 cm)
ColourGray
Sold byUnit
Country of originUnited States

Cable diameter and length choices for Master Lock S806CBL

The steel cable has a clear plastic coating and a nominal diameter of 4 mm. This product offers three separate cable lengths: 3 ft, 10 ft or 15 ft. These are discrete choices, not a continuous range with every intermediate length available. Select the required length by considering the actual route between lockout points and the free end needed for adjustment. The cable is tightened manually by pulling it through the housing to fit the loop to the installation. Four openings are provided for personal padlocks, and the clear cable coating is PVC-free. These details distinguish the S806CBL from an automatically retracting mini lockout or a thinner cable intended for very small openings. Before installation, check the opening diameter and whether the device can be retained at the points being isolated. Each worker applies a personal padlock as required by the written procedure; the cable by itself does not replace that step.

Applications: 3, 10 and 15 ft cable lengths

This device locks isolating devices that are hard to secure, such as multiple circuit breaker panels and side-by-side gate valves. Take the 3 ft cable for a nearby point, for example when the cable only needs to go around a handle or a part, the 10 ft cable when the part being secured calls for a good length, and the 15 ft cable when the cable must travel a good distance. Follow the facility's written lockout program.

Maintenance of the S806CBL locking mechanism

Wipe the cable and body after use, then coil the cable without kinking it. Check their condition before each use and replace the device at the slightest damage.

FAQ: lockout cable compatibility

Which cable lengths are offered?

3 ft (0.914 m), 10 ft (3.048 m) or 15 ft (4.572 m).

Does the device resist chemicals?

Yes. Its thermoplastic body withstands chemicals.

How does the cable tighten?

By pulling: the tightening adjusts to the point being secured.

How many padlocks can be applied?

Up to 4 padlocks.

Is the padlock included?

No. The device is sold individually, without padlocks.

Equipment suggestions for the S806CBL adjustable cable

For the person locking out the equipment, plan according to the risks of the job for gray Cee-Tec glasses (YA12E93102DX) with a foam gasket, high-visibility impact-resistant mechanic's gloves (GMXVSB), a safety hardhat (TA222), MAX disposable earplugs (OA1100) and Impacto all-purpose lightweight kneepads (VG100).

To complete the lockout equipment, consider the padlock (CA500) with a flexible shackle for suitable configurations; add the tags (CAET10) to identify an active lockout. For other needs at the workstation, the lockout (CAV7) for separately isolating a handle-operated valve provides a complementary option to select according to the equipment concerned.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

CACCS806CBL-3

Data sheet

Product group
Safety equipment
Main category
Industrial accessories
Sub category
Locking and lockout
Name of the product
Locking device with adjustable cable
Product code
CACCS806CBL
Sort by keywords
Wired locks
Product use
Locking energy-isolating devices during lockout
Manufacturer
Master Lock
Country of origin
United States of America
Features
Adjustable pull-tight cable
Characteristic adding safety
Chemical resistance
Includes
Lockout cable
Material1
Steel
Material2
Thermoplastic
Material3
Plastic
Length (ft/m)
3, 10 or 15 ft depending on selection
Diameter (po/cm)
0.157 in / 0.4 cm (4 mm nominal)
Length (in/cm)
2.9 in / 7.4 cm
Width (in/cm)
1.1 in / 2.79 cm
Height (in/cm)
2.7 in / 6.858 cm
Weight (lb/kg)
0.3 lb / 0.1 kg
***Size and weight according to selection***
Based on CACCS806CBL-3
Sold by
Unit
Color
Gray
Return conditions
Not returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
Compatible padlocks
Up to 4 padlocks

Specific References

MPN
S806CBL3

You might also like

Comments (0)
No customer reviews for the moment.