Light form-fitting ambidextrous Kevlar®/Lycra knit inspector gloves. ASTM/ANSI cut-resistant level 2. S to L size. Sold in pairs

$9.10

Please select the available option below :

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Lightweight form-fitting ambidextrous Kevlar®/Lycra knit inspector gloves. Sold in pairs.

Discontinued product only 6 pairs left. Don't try to buy more we will have to refund you.

These gloves are available in sizes ranging from small (7) to large (9). Please select the size needed in the field located above.

This glove has a cut-resistance level 2 according to ASTM and ANSI standards.

G120 peculiarities:
This Kevlar® knit glove provides an excellent cut resistance as well as an abrasion resistance and a high tensile strength. It also offers a good resistance to corrosion without compromising workers comfort and dexterity. Further, it is partially composed of Lycra which makes it exceptionally stretchy, thus the glove will conform perfectly to the shape of your hand and make handling, an easier task.

Kevlar properties:
Kevlar, a thermoplastic polymer related to aramids, is a low-density high-strength material which offers an excellent tensile strength, elongation and shear strength. This fabric doesn’t expand from temperature changes and fairly absorbs vibrations and shock. Kevlar doesn’t strain the hand and react chemically well to hydrocarbons.

Lycra properties:
Lycra also known as elastane is a synthetic fiber known for its exceptional elasticity. Indeed, Lycra can extend to 600% its original length before beginning to show signs of tearing. It also exhibits the ability to recover its original form after being stretched and dries at a blistering speed which is quite convenient while working.

Use for:
This glove is recommended for inspectors, but does not rule out other applications. It may indeed be used by workers in the metallurgic sector and for other industrial tasks since it provides a good cut-resistance.

Do not use for:
Kevlar is known to have a low resistance to UV light and moisture. Nitrile has a low resistance to open flames. This glove cannot eliminate the risk of mechanical endangerment although it offers an excellent protection on this level. As for Lycra, it is not a known allergen, but there were reported case of allergic reactions following its wearing due to the residual presence of some irritating components used in the manufacturing of the material.

Maintenance and service life:
It is recommended to carry out a basic maintenance to extend the service life of your gloves. Simply wash them with cold water, that is, 85°F/30°C, and a mild detergent. It is also recommended to rinse your glove with cold water after wash. You can then dry them at low temperature in a dryer. Never use bleach on this glove.

Type of productSafety equipment
Main categoryPersonal protection
Sub categoryGloves
Sub sub categoryCut-resistant gloves
Name of the productInspector's glove
Product codeG120
Approved/CertifiedANSI A2 cut
AmbidextrousAmbidextrous glove
Choice of formatSize small (7) and large (9) available
Characteristic adding safetyProvides 360° cut resistance
Material1Kevlar® knit
Material2Lycra
WashableWash in cold water at 85°F/30°C with mild detergent. It is recommended to rinse gloves in cold water before drying. Spread to dry. Never use bleach on this glove
Length (in/cm)8 in / 20.32 cm
Width (in/cm)5 in / 12.7 cm
Height (in/cm)0.5 in / 1.27 cm
Weight (lb/kg)0.16 lb / 0.072 Kg
Sold byPair
ColorYellow
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Gabarit glove sizes Fr

Fichier en Français gabarit grandeur de gant

Download (117.67k)

Accessories

28 other products in the same category: