compare_arrows

4 in floor marking arrows, roll of 100

Reference : ECTFL4-BC
$30.25

This item is not kept in stock. Please allow 5 days for delivery.

Roll of 100 floor arrows, 4 in, to show the direction of travel in warehouse aisles, production and packaging areas and pedestrian routes, available in white, black, green, red, blue or yellow. Cut from 5.5 mil solid-colour vinyl with no printed surface to wear off, the arrows are covered with a clear protective film that resists abrasion. Their permanent adhesive holds on most clean, dry floors.

Color: White
Quantity

Compare

4 in floor marking arrows, roll of 100

This item is not kept in stock. Please allow 5 days for delivery.

Available colours: 6 colours, roll of 100 arrows

Available in 6 colours. Select the variant you need from the drop-down menu.

Sylprotec codeManufacturer modelColour
ECTFL4-BCVA400WWhite
ECTFL4-NOVA400KBlack
ECTFL4-VEVA400GGreen
ECTFL4-RGVA400RRed
ECTFL4-BLVA400BBlue
ECTFL4-JAVA400YYellow

These die-cut floor arrows show the direction of travel in warehouse aisles, production and packaging areas, pedestrian routes and 5S or Lean layouts. Each one is cut from 5.5 mil colour-through vinyl, with no surface print that could wear off, then protected by a clear protective film that resists abrasion. The permanent adhesive backing holds them on most clean, dry floors. The roll holds 100 arrows of 4 in in a single colour, to mark a complete route and replace a worn arrow. They are made in Canada.

Features of the floor marking arrows

  • Colour-through vinyl, with no surface print to wear off.
  • Clear protective film that protects the arrow in busy areas.
  • Permanent adhesive for a secure application on a clean, dry floor.
  • 4 in die-cut arrow, clearly visible to guide pedestrians and workflows.
  • Roll of 100 identical arrows, ready to apply.

Floor marking arrow applications

The manufacturer recommends them to show direction in warehouse aisles and traffic flows, guide movement in production and packaging areas, direct pedestrians and mark routes, and organize layouts following 5S or Lean methods. To lay out the aisles themselves, use a floor tape with beveled edges, such as the yellow heavy-traffic floor marking roll (ECTHDJA), 100 ft or the blue heavy-traffic floor marking strip (ECTHDBL), 100 ft, available in 2 and 4 in.

Floor marking arrow technical specifications

FeatureDetail
MaterialColour-through vinyl
ProtectionClear protective film
Thickness5.5 mil (0.0055 in, 0.14 mm)
Arrow size4 X 4 in (10.16 X 10.16 cm)
StandardANSI Z535.1
ColoursWhite, black, green, red, blue and yellow
AdhesivePermanent
Application surfaceClean, dry floor
Country of originCanada
Sold byRoll of 100 arrows

Floor arrow installation and care

Sweep and clean the floor, then let it dry: the permanent adhesive requires a clean, dry surface. Mark the position of each arrow, point it in the direction of travel, then press it firmly over its whole surface, right to the edges. Sweep routes regularly to keep the arrows visible, and replace a damaged or lifting arrow from the same roll.

FAQ: floor marking arrows

Which colour should I choose?

Match the colour of the floor line or of your facility's code: an arrow in the same colour as the floor line extends the route, while a contrasting colour makes it stand out. All six colours are selected from the drop-down menu on this page.

How many arrows are on the roll?

The roll holds 100 arrows of 4 in, all in the same colour.

Does the colour wear off with traffic?

The vinyl is coloured through, with no surface print to wear off, and each arrow is protected by a clear protective film that resists abrasion and foot-traffic wear.

Are they suitable for forklift lanes?

The manufacturer intends them mainly to guide pedestrians and workflows. To mark forklift lanes, choose a heavy-traffic floor tape with beveled edges, such as the yellow heavy-traffic floor marking tape (ECTHDJA), 4 in X 100 ft.

What floors can they be applied to?

Most clean, dry floors. Clean and dry the surface before application for good adhesion.

Suggestions for the floor marking arrows

For the person who applies the arrows on their knees along pedestrian routes, plan for the Impacto (VG103) Gelite hard shell knee pads with gel cushion, the Endura (G404) cowhide driver gloves, which keep the dexterity needed to peel the liner, the Uvex (YAU3200) Genesis safety glasses with clear anti-fog lens, the Pioneer (V6930) 6930 orange adjustable, detachable traffic vest and the regular (OA1250) 312-1219 uncorded disposable earplugs.

Three useful additions for floor marking are: Keep your distance floor sign (EDCOVID), Caution forklifts floor sign (EDCH) and No pedestrian access sign (ECI200). Select them according to the layout and hazards present.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

ECTFL4-BC

Data sheet

Product group
Safety equipment
Main category
Sign and lock
Sub category
Cones and barricade tapes
Name of the product
Floor arrow
Product code
ECTFL4
Sort by keywords
Marking tapes
Product use
Floor marking
Approved/Certified
ANSI Z535.1
Manufacturer
Incom Direct
Country of origin
Canada
Thickness in mils
5.5 mils
Features
To show pedestrian and workflow direction on the floor
Additional Features
Clear protective polyester film
Mounting type
Permanent adhesive back
Form
Arrow-shaped
Material
Vinyl
Dimensions of the product
4 x 4 in / 10.16 x 10.16 cm
Length (in/cm)
4 in / 10.16 cm
Width (in/cm)
4 in / 10.16 cm
Height (in/cm)
0.02 in / 0.05 cm
Weight (lb/kg)
0.675 lb / 0.306 kg
Sold by
Roll of 100
Color
Variable depending on selection
HS Code
3919102055
Return conditions
Not returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
Caution
Apply to a clean, dry floor

Specific References

MPN
VA400W

You might also like

Comments (0)
No customer reviews for the moment.