- New
This item is not stocked: allow 5 to 7 days for delivery.
Gray Master Lock S806CBL adjustable cable lockout, offered with a 3, 10 or 15 ft cable. The 3 ft cable suits closely spaced isolation points, the 10 ft cable reaches a more distant part and the 15 ft cable offers the longest reach. It pulls tight, resists chemicals and takes up to 4 padlocks. Choose your length in the format table. Sold individually, padlocks not included.
Offered with a 3, 10 or 15 ft cable; choose your length in the format table below.
This item is not stocked: allow 5 to 7 days for delivery.
| Format | Sylprotec code | Manufacturer model | Product weight |
|---|---|---|---|
| 3 ft | CACCS806CBL-3 | S806CBL3 | 0.3 lb (0.136 kg) |
| 10 ft | CACCS806CBL-10 | S806CBL10 | 0.46 lb (0.209 kg) |
| 15 ft | CACCS806CBL-15 | S806CBL15 | 0.6 lb (0.272 kg) |
When the point being secured is within easy reach, a short cable avoids extra slack to manage; when it is farther away or the cable must go around bulky equipment, a longer cable gives the reach you need. All three formats pull tight, and up to 4 people can apply their padlocks.
| Feature | Detail |
|---|---|
| Manufacturer | Master Lock |
| Materials | Steel, thermoplastic and plastic |
| Cable length | 3 ft (0.914 m), 10 ft (3.048 m) or 15 ft (4.572 m) |
| Number of padlocks | Up to 4 |
| Body height, 3 ft cable | 2.69 in (6.83 cm) |
| Body length, 3 ft cable | 2.875 in (7.30 cm) |
| Body width, 3 ft cable | 1.09 in (2.77 cm) |
| Colour | Gray |
| Sold by | Unit |
| Country of origin | United States |
The steel cable has a clear plastic coating and a nominal diameter of 4 mm. This product offers three separate cable lengths: 3 ft, 10 ft or 15 ft. These are discrete choices, not a continuous range with every intermediate length available. Select the required length by considering the actual route between lockout points and the free end needed for adjustment. The cable is tightened manually by pulling it through the housing to fit the loop to the installation. Four openings are provided for personal padlocks, and the clear cable coating is PVC-free. These details distinguish the S806CBL from an automatically retracting mini lockout or a thinner cable intended for very small openings. Before installation, check the opening diameter and whether the device can be retained at the points being isolated. Each worker applies a personal padlock as required by the written procedure; the cable by itself does not replace that step.
This device locks isolating devices that are hard to secure, such as multiple circuit breaker panels and side-by-side gate valves. Take the 3 ft cable for a nearby point, for example when the cable only needs to go around a handle or a part, the 10 ft cable when the part being secured calls for a good length, and the 15 ft cable when the cable must travel a good distance. Follow the facility's written lockout program.
Wipe the cable and body after use, then coil the cable without kinking it. Check their condition before each use and replace the device at the slightest damage.
3 ft (0.914 m), 10 ft (3.048 m) or 15 ft (4.572 m).
Yes. Its thermoplastic body withstands chemicals.
By pulling: the tightening adjusts to the point being secured.
Up to 4 padlocks.
No. The device is sold individually, without padlocks.
For the person locking out the equipment, plan according to the risks of the job for gray Cee-Tec glasses (YA12E93102DX) with a foam gasket, high-visibility impact-resistant mechanic's gloves (GMXVSB), a safety hardhat (TA222), MAX disposable earplugs (OA1100) and Impacto all-purpose lightweight kneepads (VG100).
To complete the lockout equipment, consider the padlock (CA500) with a flexible shackle for suitable configurations; add the tags (CAET10) to identify an active lockout. For other needs at the workstation, the lockout (CAV7) for separately isolating a handle-operated valve provides a complementary option to select according to the equipment concerned.
Data sheet
Specific References
You might also like