compare_arrows

Brady 65966 Electrical lockout device, pack of 6

Reference : CAC65966
$89.30

This item is not stocked: allow 5 to 7 days for delivery.

Pack of 6 Brady 65966 clamp-on circuit breaker lockouts in red polypropylene, made in Mexico. They tighten onto the switch and work on a wide range of single-pole and internal-trip multi-pole 480/600 V breakers. The detachable cleat supplied expands the range of compatible breakers. Check the handle fit and follow the workstation’s lockout procedure. Each pack contains 6 lockouts that accept the worker's padlock.

Quantity

Brady 65966 Electrical lockout device, pack of 6

This item is not stocked: allow 5 to 7 days for delivery.

Brady model: 65966. This pack contains 6 red clamp-on lockouts that hold a circuit breaker switch in the open position during maintenance. Extremely versatile, they work on a wide range of single-pole and internal-trip multi-pole 480/600 V breakers. The detachable cleat supplied expands the range of breakers on which they can be installed even further. Their red polypropylene is easy to spot in a panel.

Features of the Brady 65966 clamp-on lockouts

  • 6 lockouts per pack.
  • For single-pole and internal-trip multi-pole breakers.
  • Detachable cleat included to expand the range of breakers.
  • Highly visible red polypropylene.
  • Accept the worker's padlock.

Applications of clamp-on breaker lockouts

The Brady 65966 is intended for 480/600 V breakers and accepts a maximum switch width of 1.5 in. Its pack of six suits teams preparing several lockout points. The Brady 65965, intended for 120/277 V applications, has a maximum switch width of 0.65 in. Consider voltage and handle geometry together to select the appropriate size.

Brady 65966 lockouts technical specifications

CharacteristicValue
Height1.61 in / 4.1 cm
Length / depth3.25 in / 8.25 cm
Width2.2 in / 5.6 cm
Published model dimensions (H X W X D)1.588 in H X 3.253 in W X 2.175 in D
Packaged dimensions6 X 2.2 X 4.2 in
Packaged weight0.6 lb / 0.27 kg
Main materialPolypropylene
ManufacturerBrady
Country of originMexico
Sold byPack of 6 units
CharacteristicFor single-pole and internal-trip multi-pole breakers

Using and caring for the clamp-on lockouts

Open the circuit breaker according to your written procedure. Place the lockout on the switch, add the detachable cleat if the breaker shape requires it, tighten the clamp, then apply your padlock and your lockout tag. Verify the absence of voltage before starting work. Replace any lockout that is cracked or no longer clamps firmly.

Flip-cover mechanism and removable cleat

The thumbwheel tightens the clamp onto the handle without a screwdriver. The flip cover then covers the thumbwheel and accepts the padlock to prevent loosening. Keep the included removable cleat with the device: it adapts the grip to certain breaker configurations. Before preparing the six lockouts for a job, compare the handle shape and width with the capacity of the selected model. The stated voltage alone does not establish mechanical compatibility with every breaker in a panel. Check that the attachment is retained correctly, then follow the applicable isolation and verification procedure.

FAQ: Brady 65966 clamp-on lockouts

How many lockouts does the pack contain?

Six lockouts.

Which circuit breakers do they fit?

On compatible 480/600 V breakers with a switch no wider than 1.5 in.

What is the detachable cleat for?

It is supplied with the lockouts and expands the range of breakers on which they can be installed.

Where are they made?

In Mexico, in red polypropylene.

What is the delivery time?

The pack is not stocked: allow 5 to 7 days for delivery.

Suggestions for plant circuit breaker lockout

For plant maintenance, depending on the hazards of the job, plan for Pyramex Legacy clear safety glasses (YA10910), Ansell HyFlex foam nitrile gloves (G11800), a Pioneer women's orange flame-resistant coverall (V7702F), Honeywell FirmFit corded earplugs (OA1105C) and a Pioneer women's royal blue flame-resistant garment (V7704F).

For personal lockout, the padlock (CA1ZKD1) model with a Zenex body and nylon shackle provides a keyed-different option. If your procedure instead calls for an aluminium body, select the red model (CA1ARG) with a 1/4 in shackle, checking its fit in the device. Complete the identification with the tags (CAET5) bearing the French DANGER NE PAS OPÉRER message. These accessories complement the workstation’s lockout program; padlocks are not included with the device.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

CAC65966

Data sheet

Product group
Safety equipment
Main category
Industrial accessories
Sub category
Locking and lockout
Name of the product
Clamp-on lockout, circuit breaker type
Product code
CAC65966
Sort by keywords
Circuit-breaker locks
Product use
Locking energy-isolating devices during lockout
Manufacturer
Brady
Country of origin
China
Format
Clamp-on, 480/600 V
Features
Single-pole and internal-trip multi-pole breakers; maximum switch width 1.5 in
Includes
Detachable cleat
Operating temperature
From -4 to 176 °F / -20.00 to 80.00 °C
Material1
Polypropylene
Length (in/cm)
3.25 in / 8.25 cm
Width (in/cm)
2.2 in / 5.6 cm
Height (in/cm)
1.61 in / 4.1 cm
Weight (lb/kg)
0.6 lb / 0.27 kg
Sold by
Pack of 6 units
Color
Red
HS Code
3926.90.9989
Return conditions
Not returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
Compatible padlocks
1 padlock per lockout

Specific References

UPC
754473659660
MPN
65966

You might also like

Comments (0)
No customer reviews for the moment.