compare_arrows

Brady 45191 adjustable cable lockout 6 ft

Reference : CACC45191
$50.60

This item is not stocked: allow 10 to 13 days for delivery.

Blue Brady 45191 pull-tight adjustable cable lockout with a 6 ft (1.83 m) corrosion-resistant galvanized steel cable. Easy to use, it is designed for unusual devices that cannot be locked out with a traditional lockout. Its fiberglass-reinforced nylon body has a single hole for 1 padlock with a shackle of at most 0.31 in (7.87 mm). The manufacturer states service temperatures from -4 to 248 °F (-20 to 120 °C). Padlock sold separately.

Quantity

Compare

Brady 45191 adjustable cable lockout 6 ft

Brady model: 45191.

This item is not stocked: allow 10 to 13 days for delivery.

This versatile energy isolation device addresses cases where a traditional lockout does not fit. It comes with its 6 ft (1.83 m) galvanized steel cable, which resists corrosion: wrap it around the point to be isolated, tighten it by pulling, then apply a padlock. A worker can thus secure an unusually shaped component with a single device.

Features of the Brady cable lockout device

  • Pull-tight action to adjust the cable.
  • Corrosion-resistant galvanized steel cable included, 6 ft (1.83 m) long and 0.125 in (3.18 mm) in diameter.
  • Fiberglass-reinforced nylon body.
  • Single padlock hole: 1 padlock with a shackle of at most 0.31 in (7.87 mm).
  • Blue, sold individually.
FeatureDetail
ManufacturerBrady
Model45191
Device materialFiberglass-reinforced nylon
CableCorrosion-resistant galvanized steel, 6 ft (1.83 m), 0.125 in (3.18 mm) in diameter
TypePull-tight
Padlock holes1
Number of padlocks1, with a shackle of at most 0.31 in (7.87 mm)
Device height6.5 in (165.1 mm)
Device length3 in (76.2 mm)
Device width1.1 in (27.9 mm)
Packaged dimensions8.9 X 8.7 X 3.6 in
Weight0.904 lb (410 g)
Service temperatures-4 to 248 °F (-20 to 120 °C)
ColourBlue
Sold byUnit
Country of originChina

Applications on several energy isolation points

The device protects against mechanical risk on unusual devices that cannot be locked out with a traditional lockout, in a shop or plant. With its single hole, it receives 1 padlock and suits one person. For lockout by several workers, add a hasp (CA2) for 6 padlocks. Follow the facility's written lockout program.

Maintenance and inspection of the lockout and cable

Shut down the equipment and isolate the energy source. Pass the cable around the point to be isolated, insert it into the device, pull to tighten it and apply your padlock. Inspect the cable before each use and replace it if it is frayed, kinked or crushed.

FAQ about the Brady 45191 device

Is the cable included?

Yes: a galvanized steel cable, 6 ft (1.83 m) long and 0.125 in (3.18 mm) in diameter. Brady also designates replacement cables 65319 (8 ft) and 65320 (10 ft) for this device; contact us to obtain them.

How does it tighten?

By pulling: the cable is pulled to adjust it around the point to be isolated.

How many padlocks does it accept?

Only one: the device has 1 hole, for a padlock with a shackle of at most 0.31 in (7.87 mm). For several workers, add the Master Lock 420 metal hasp (CA2).

Does the cable resist corrosion?

Yes. It is made of galvanized steel, which gives it corrosion resistance.

Does it withstand cold and heat?

The manufacturer states service temperatures from -4 to 248 °F (-20 to 120 °C).

Cable lockout accessory suggestions

For the plant mechanic, plan for 3M SecureFit safety glasses (YASF401) with clear lenses, Endura cowhide driver gloves (G404), a Delta Plus Americana climber Peak T2 type 2 class E hardhat (TA222), EARSOFT 33 dB earplugs (OA1252) and Impacto non-slip hard-shell kneepads (VG102).

To complete your lockout equipment, the Brady keyed-alike padlocks (CAVAL38KA3) come in a pack of 3. The Accuform do not start tags (CAET2) are sold in packs of 5. On an electrical panel, the Brady electrical (CAC179480) lockout device and the Justrite single-pole (CACKDD160) circuit breaker lockout go on before the cable lockout; for a cabinet, choose the Brady electrical panel door (CAC151633) lockout. Check the shackle fit in the device and your procedure requirements before selecting these separately sold accessories. A tag does not replace the isolating device or energy verification.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

CACC45191

Data sheet

Product group
Safety equipment
Main category
Industrial accessories
Sub category
Locking and lockout
Name of the product
Locking device with adjustable cable
Product code
CACC45191
Sort by keywords
Wired locks
Product use
Locking energy-isolating devices during lockout
Manufacturer
Brady
Country of origin
China
Features
Pull-tight device with 6 ft cable
Additional Features
1 padlock hole
Characteristic adding safety
Corrosion resistance
Characteristics of the strap or cable
6 ft galvanized steel cable
Operating temperature
From -4 to 248 °F / from -20 to 120 °C
Composition
Fiberglass-reinforced nylon; Steel
Material1
Fiberglass-reinforced nylon
Material2
Steel
Diameter (po/cm)
Cable: 0.125 in / 3.18 mm
Length (in/cm)
3 in / 7.6 cm
Width (in/cm)
1.12 in / 2.84 cm
Height (in/cm)
6.5 in / 16.51 cm
Weight (lb/kg)
0.9 lb / 0.41 kg
Sold by
Unit
Color
Blue
HS Code
7312.10.7000
Return conditions
Not returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
Compatible padlocks
Padlock shackle up to 0.31 in (7.87 mm)

Specific References

UPC
754473451912
MPN
45191

You might also like

Reference: CAP1

Pneumatic Lockouts

$38.35
Comments (0)
No customer reviews for the moment.