- New
Pack of 5 Accuform TSS103CTM cardstock scaffold status tags with the English message OK DO NOT ALTER, in green and black. Hung on the scaffold, the tag shows its accepted status and asks that nothing be altered. A write-on area lets you record the inspection according to your procedure. This is not a lockout tag: it is used for scaffold tracking. A small pack for a few scaffolds.
Delivery time: 21 to 28 business days.
Accuform model TSS103CTM (Accuform NMC brand): cardstock scaffold status tag with the English message OK DO NOT ALTER.
On a jobsite, everyone must see at a glance whether a scaffold has been given its status and whether it must be left as is. This green tag shows it: OK, then DO NOT ALTER. The text is printed in English only.
| Feature | Detail |
|---|---|
| Manufacturer | Accuform |
| Model | TSS103CTM |
| Type | Scaffold status tag |
| Printed message | OK DO NOT ALTER |
| Text language | English |
| Material | PF-Cardstock (polyolefin) |
| Colour | Green and black |
| Sold by | Pack of 5 |
| Face of one tag | 3.13 X 5.88 in / 7.95 X 14.94 cm |
| Country of origin | United States |
| Weight of the pack of 5 | 0.04 lb / 0.018 kg |
The weight shown is that of the pack of 5, not of one tag.
The tag is used for scaffold status tracking. After the inspection required by your procedure, the person responsible fills out the tag and hangs it on the scaffold, where it can be seen from the access point. The message OK DO NOT ALTER shows the accepted status and asks that the scaffold not be altered. Remove or replace the tag as soon as the status changes or a new inspection is done. It is used neither for lockout nor for isolating an energy source.
PF-Cardstock resists water and tearing, but it is meant for indoor or short-term use: check regularly that the tag stays legible and replace it if it is damaged or faded.
OK shows the accepted status of the scaffold; DO NOT ALTER asks that it not be modified. The text is in English only.
No. It is a scaffold status tag. It does not replace a lockout procedure and does not prove that an energy source is isolated.
The person designated by your scaffold inspection procedure, who records the required information in the write-on area.
The pack contains 5 tags measuring 3.13 X 5.88 in / 7.95 X 14.94 cm.
It is made of Accuform PF-Cardstock, a paper-free polyolefin, in green and black, with a write-on surface to record the inspection.
For the scaffolder and the person in charge of inspection, plan according to the risks of the task for a Delta Plus Omega II type 2 class E helmet (TA14OR) with a 4-point ratchet suspension, Jackson Safety Nemesis glasses (YA3297) with a clear lens, Endura cowhide driver gloves (G404) for handling components, Honeywell FirmFit corded earplugs (OA1105C), if the noise calls for them, and a DBI-SALA ExoFit X200 Class ALP Construction harness (FPH140201XCALP) to integrate into the chosen fall protection system; the anchorage remains to be determined for your installation.
These accessories concern a separate lockout intervention, not validation of scaffold status. To complete your lockout equipment, the Master Lock 406 padlock with a nylon (CA1ZKD1) shackle is keyed different. The red American Lock A1106RED aluminum (CA1ARG) padlock has a 1/4 in boron steel shackle. To identify the intervention, the tags (CAET11) bear the French message "DANGER ÉQUIPEMENT VERROUILLÉ NE PAS OPÉRER" and are sold in packs of 25. Check the shackle fit in the device and your procedure requirements before selecting these separately sold accessories. A tag does not replace the isolating device or energy verification.
Data sheet
Specific References
You might also like