Brady laminated vinyl marking tape, magenta and yellow, 54 ft

Brady laminated vinyl marking tape, magenta and yellow, 54 ft

Manufacturer code Brady: 55312, model 55312

This item is not kept in stock. Please allow 15 days for delivery.

Available in 3 widths. Select the variant you need from the drop-down menu.

The Brady marking tape flags obstructions, low hanging objects, pillars, passageways, aisles and other hazardous areas or objects indoors or outdoors. It is made of Brady B-950 high performance laminated vinyl with a high gloss finish: the magenta and yellow graphics are encapsulated beneath a layer of abrasion-resistant vinyl. Its adhesive is pressure-sensitive and rubber-based, and the tape withstands most common chemicals, solvents, oils and water. Each roll is 54 ft (648 in) long and comes in three widths: 1-1/2 in (Brady 55312), 2 in (Brady 55313) and 3 in (Brady 55314). Designed for indoor and outdoor marking, it is made in the United States, except the 2 in width, which is made in China.

Features of the Brady marking tape

• B-950 high performance laminated vinyl, high gloss
• Magenta and yellow graphics encapsulated beneath an abrasion-resistant vinyl layer
• Pressure-sensitive rubber-based adhesive
• Withstands most common chemicals, solvents, oils and water
• 54 ft roll in 1-1/2, 2 or 3 in widths

Applications of the Brady marking tape

In the plant or the warehouse, the Brady marking tape draws attention to pillars, low hanging objects and obstructions in passageways and aisles. Choose the width to suit the surface to be marked: 1-1/2, 2 or 3 in, always on a 54 ft roll.

Care of the Brady marking tape

Wipe off dirt with a damp cloth: the tape withstands water, oils and most common chemicals. Replace worn sections to keep the marking clearly visible. The Brady B-950 technical data sheet specifies indoor and outdoor use. Outdoor durability depends in particular on climate and application conditions.

FAQ: the Brady marking tape

What color is the tape?

Magenta and yellow. The graphics are encapsulated beneath a layer of abrasion-resistant vinyl.

Which widths are available?

1-1/2 in (Brady 55312), 2 in (Brady 55313) and 3 in (Brady 55314), all on a 54 ft roll.

Can it be used outdoors?

Yes. The Brady B-950 technical data sheet specifies indoor and outdoor use. Outdoor durability depends on climate, application and color; it is not a guaranteed service life.

Does it resist oils and solvents?

Yes. It withstands most common chemicals, solvents, oils and water.

Where is it made?

In the United States for the 1-1/2 and 3 in widths. The 2 in width is made in China.

Suggestions for this Brady marking tape

For the maintenance worker marking pillars and low hanging objects in a warehouse with this Brady tape, plan for a Pioneer orange high-visibility detachable vest (V6930) with 5 pockets to stay visible to forklift drivers, TenActiv polyurethane coated gloves (GS13TAGPU) to handle the rolls, 3M SecureFit SF201 safety glasses (YASF201) with a clear anti-fog lens, 3M uncorded disposable earplugs (O1100) near noisy conveyors and, where two aisles cross, a half-dome convex mirror (M88) to see oncoming traffic.

For wider black and yellow marking that stands up to heavy abrasion, see the 4 in Incom laminated tape (ECT751). In passageways, a yellow “Attention” 3 in barricade tape (ECT3YF1) or a black non-slip 1 in adhesive (ECT748) tape completes the marking, and a 328 ft flagged warning line (EFLAC) flags other obstructions. During work in the aisle, set an 18 in orange cone (EPTCONE) with a reflective band.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.