compare_arrows

Justrite KDD230 StopPlug electrical plug lockout

Reference : CACKDD230
$33.65

This item is not stocked: allow 5 to 7 days for delivery.

Red Justrite KDD230 StopPlug electrical plug lockout from the STOPOUT series. This large 6 X 3 X 3 in octagonal enclosure holds the plugs of 110, 220, 550 or 600 V devices, and its pry-guard edge protects the lockout. It prevents industrial equipment from being plugged back in during maintenance. It accepts a plug of at most 5.5 X 2.5 X 2.5 in. Instructions included. Sold individually, padlock not included.

Quantity

Compare

Justrite KDD230 StopPlug electrical plug lockout

Justrite model: KDD230.

This item is not stocked: allow 5 to 7 days for delivery.

Plugs on higher-voltage devices call for a larger enclosure. This 6 X 3 X 3 in StopPlug covers 110, 220, 550 and 600 V devices. For a 110 V device, the StopPlug KDD225 (CACKDD225) offers a smaller format.

Features of the CKDD230 lockout

  • Octagonal pry-guard enclosure for electrical plugs.
  • For 110/220/550/600 V electrical devices.
  • STOPOUT StopPlug series.
  • Takes one padlock.
  • Plastic and steel, red.
  • Instructions included.
FeatureDetail
ManufacturerJustrite
ModelKDD230
SeriesSTOPOUT® StopPlug™
Voltage110/220/550/600 V
MaterialsPlastic and steel
Number of padlocks1
Maximum shackle diameter9/32 in (0.28125 in / 7.14375 mm)
Maximum plug size5.5 X 2.5 X 2.5 in (13.97 X 6.35 X 6.35 cm)
Maximum cord diameter1 in (2.54 cm)
Device dimensions6 X 3 X 3 in
Packaged dimensions6 X 3 X 3 in
Weight1.162 lb (0.527 kg)
IncludesInstructions
ColourRed
Sold byUnit
Country of originChina

StopPlug 230 enclosure size and padlock fit

The StopPlug 230 uses a red octagonal plastic-and-steel enclosure to surround an electrical plug and prevent reconnection. Its external dimensions are 6 × 3 × 3 in. The manufacturer associates this size with 110, 220, 550 and 600 V plugs, but voltage alone does not determine whether a plug will fit inside the enclosure. Compare the plug shape, overall size and cord exit with the actual device. The padlock must have a shackle no larger than 9/32 in in diameter, approximately 7.1 mm. The pry-guard edge is a mechanical feature of the housing, not a statement of dielectric certification. The small and large StopPlug models accommodate different physical sizes; they should not be selected on the assumption that a higher voltage always means a larger plug. Close the enclosure around the disconnected plug and apply the lockout according to the instructions and the facility’s procedure. Select the padlock separately, checking its shackle as well as the fit of the plug enclosure.

Applications: electrical plugs and StopPlug enclosures

The KDD230 is for plug-connected equipment from 110 to 600 V that is unplugged before maintenance, in a plant or shop. The plug must measure at most 5.5 X 2.5 X 2.5 in and the cord at most 1 in in diameter. Follow the facility's written lockout program and the instructions provided.

Maintenance of the CKDD230 locking mechanism

Wipe the enclosure after use and check that it closes properly before each use. Replace it if cracked or deformed.

FAQ: electrical lockout selection

What voltages is it intended for?

110, 220, 550 and 600 V electrical devices.

What size is it?

6 X 3 X 3 in.

How many padlocks can be applied?

One padlock with a shackle of at most 9/32 in (7.14375 mm), sold separately.

Is a smaller format available?

Yes: the StopPlug model (CACKDD225) for 110 V devices.

What is the delivery time?

This item is not stocked: allow 5 to 7 days for delivery.

Equipment suggestions for the CKDD230 lockout

For the technician working on the equipment, plan according to the risks of the job for 3M Privo safety glasses (YA12262) with a smoke polycarbonate lens, gray Superior Touch polyurethane-coated Dyneema gloves (GS13SXGPU), a V-Gard miner's class E hardhat (TA84), 3M Classic earplugs (OA101) and a blue Pioneer flame-resistant arc-rated vest (V7730).

To complete the lockout equipment, consider the padlock (CA500) with a flexible shackle to secure the device; add the tags (CAET8) to identify the worker responsible for the lockout. For other needs at the workstation, the enclosure (CA5) for other 110 V plugs requiring a smaller format provides a complementary option to select according to the equipment concerned.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

CACKDD230

Data sheet

Product group
Safety equipment
Main category
Industrial accessories
Sub category
Locking and lockout
Name of the product
Locks for electrical plug
Series of products
STOPOUT® StopPlug™
Product code
CACKDD230
Sort by keywords
Electric device locks
Product use
Locking energy-isolating devices during lockout
Manufacturer
Justrite
Country of origin
China
Features
Octagonal pry-guard enclosure for electrical plugs
Characteristic adding safety
Pry-guard edge
Includes
Instructions
Material1
Plastic
Material2
Steel
Length (in/cm)
6 in / 15.24 cm
Width (in/cm)
3 in / 7.6 cm
Height (in/cm)
3 in / 7.6 cm
Weight (lb/kg)
1.161 lb / 0.527 kg
Sold by
Unit
Color
Red
Return conditions
Not returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
Compatible padlocks
1 padlock; maximum 9/32 in shackle

Specific References

MPN
KDD230

Download

You might also like

Reference: CAP1

Pneumatic Lockouts

$38.35
Comments (0)
No customer reviews for the moment.