compare_arrows

Justrite KDD225 StopPlug electrical plug lockout

Reference : CACKDD225
$29.15

This item is not stocked: allow 5 to 7 days for delivery.

Red Justrite KDD225 StopPlug electrical plug lockout from the STOPOUT series. The plug of a 110 V device fits inside this octagonal enclosure, whose pry-guard edge resists tampering once the padlock is on. A simple way to keep a device from being plugged back in during maintenance. The enclosure accepts a plug of at most 2 X 1.25 X 1.25 in. Instructions included. Sold individually, padlock not included.

Quantity

Justrite KDD225 StopPlug electrical plug lockout

Justrite model: KDD225.

This item is not stocked: allow 5 to 7 days for delivery.

An unplugged device can always be plugged back in by mistake. This StopPlug enclosure holds the 110 V plug and its pry-guard edge protects the lockout. For a higher voltage, see the larger StopPlug KDD230 (CACKDD230); for a two- or three-prong polarized plug, the Brady StoPower lockout (CAC65673).

Features of the CKDD225 lockout

  • Octagonal pry-guard enclosure for electrical plugs.
  • For 110 V electrical devices.
  • STOPOUT StopPlug series.
  • Takes one padlock.
  • Plastic and steel, red.
  • Instructions included.
FeatureDetail
ManufacturerJustrite
ModelKDD225
SeriesSTOPOUT® StopPlug™
Voltage110 V
MaterialsPlastic and steel
Number of padlocks1
Maximum shackle diameter9/32 in (0.28125 in / 7.14375 mm)
Maximum plug size2 X 1.25 X 1.25 in (5.08 X 3.175 X 3.175 cm)
Maximum cord diameter0.5 in (1.27 cm)
Device dimensions3.5 X 2.25 X 2.25 in
Packaged dimensions3.5 X 2.5 X 3 in
Weight0.138 lb (0.063 kg)
IncludesInstructions
ColourRed
Sold byUnit
Country of originChina

StopPlug 225 enclosure size and padlock fit

The StopPlug 225 uses a red octagonal plastic-and-steel enclosure to surround an electrical plug and prevent reconnection. Its external dimensions are 3 1/2 × 2 1/4 × 2 1/4 in. The manufacturer associates this size with 110 V plugs, but voltage alone does not determine whether a plug will fit inside the enclosure. Compare the plug shape, overall size and cord exit with the actual device. The padlock must have a shackle no larger than 9/32 in in diameter, approximately 7.1 mm. The pry-guard edge is a mechanical feature of the housing, not a statement of dielectric certification. The small and large StopPlug models accommodate different physical sizes; they should not be selected on the assumption that a higher voltage always means a larger plug. Close the enclosure around the disconnected plug and apply the lockout according to the instructions and the facility’s procedure. Select the padlock separately, checking its shackle as well as the fit of the plug enclosure.

Applications: electrical plugs and StopPlug enclosures

The KDD225 suits 110 V corded devices that are unplugged before maintenance: tools, shop machines or small equipment. Follow the facility's written lockout program and the instructions provided.

Maintenance of the CKDD225 locking mechanism

Wipe the enclosure after use and check that it closes properly before each use. Replace it if cracked or deformed.

FAQ: electrical lockout selection

What voltage is it intended for?

110 V electrical devices.

What is the edge for?

It is a pry-guard edge that hinders attempts to force the enclosure.

What plug fits inside the enclosure?

A plug of at most 2 X 1.25 X 1.25 in, with a cord of at most 0.5 in in diameter.

How many padlocks can be applied?

One padlock with a shackle of at most 9/32 in (7.14375 mm), sold separately.

Is a larger format available?

Yes: the StopPlug model (CACKDD230) measures 6 X 3 X 3 in.

Equipment suggestions for the CKDD225 lockout

For the person unplugging the device, plan according to the risks of the job for 3M SecureFit safety glasses (YASF203) with an amber anti-fog lens, SuperiorTouch polyurethane-coated nylon knit gloves (GS13GPU), a Delta Plus Independence high-visibility class E hardhat (TA14LRHV), 3M E-A-R earplugs (OA2100) with an insertion stem and Pioneer FR-tech navy blue flame-retardant pants (V7761), Arc 2 rated.

To complete the lockout equipment, consider the padlock (CA1ARG) with a 1/4 in shackle to secure the enclosure; add the tags (CAET8) to identify the isolated point. For other needs at the workstation, the bag (CAESAC) for other plug configurations requiring a suitable alternative provides a complementary option to select according to the equipment concerned.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

CACKDD225

Data sheet

Product group
Safety equipment
Main category
Industrial accessories
Sub category
Locking and lockout
Name of the product
Locks for electrical plug
Series of products
STOPOUT® StopPlug™
Product code
CACKDD225
Sort by keywords
Electric device locks
Product use
Locking energy-isolating devices during lockout
Manufacturer
Justrite
Country of origin
China
Features
Octagonal pry-guard enclosure for electrical plugs
Characteristic adding safety
Pry-guard edge
Includes
Instructions
Material1
Plastic
Material2
Steel
Length (in/cm)
3.5 in / 9 cm
Width (in/cm)
2.25 in / 5.7 cm
Height (in/cm)
2.25 in / 5.71 cm
Weight (lb/kg)
0.139 lb / 0.063 kg
Sold by
Unit
Color
Red
Return conditions
Not returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
Compatible padlocks
1 padlock; maximum 9/32 in shackle

Specific References

MPN
KDD225

Download

You might also like

Reference: CAP1

Pneumatic Lockouts

$38.35
Comments (0)
No customer reviews for the moment.