This Dexterity Pro™ cut-resistant glove made with TenActiv™ yarn is ultra-thin to provide exceptional freedom of movement while maintaining maximum cut resistance. It is ideal for precision tasks that require dexterity and involve high cut hazards, with 360° protection meeting ANSI A9 cut resistance. Its high-visibility yellow colour makes the hand and glove easier to see in active work areas, while the ultra-thin nitrile foam palm coating provides good grip on wet or lightly oily surfaces and a near-bare-hand feel.
The Superior product code is S21TXUGFN. This glove is sold by the pair and is available from double extra small (5) to triple extra large (12). Please select the required size in the field above before adding it to the cart.
Video demonstration: see the TenActiv™ S21TXUFN cut demonstration on the Superior website.
According to the original product text and the main product data, this model provides A9 cut resistance with level 3 abrasion and puncture resistance. The TenActiv™ composite knit provides 360° cut resistance while keeping the fine feel of a 21-gauge knit to reduce fatigue and improve dexterity.
The nitrile foam coating on the palm and fingers helps stabilize grip on lightly oiled materials. This coating type remains flexible and precise, which is useful for parts handling, assembly, metal handling, glass and jobs where the hand must stay protected without losing too much sensitivity.
The high-visibility yellow colour makes the glove easy to spot at the workstation and supports visual inspection. Touchscreen compatibility helps workers move from one task to another without removing the glove, depending on the coating condition and screen type. The model is also listed as latex-free and silicone-free, and the information provided for this model indicates that it is suitable for food handling.
This glove is recommended for labour work, construction, processing industries, assembly lines, industries that handle metal, glass and material handling, pulp and paper, warehouse work and general tasks where the cut hazard is significant.
It fits naturally within the cut-resistant gloves selection when the job requires A9 protection, reliable grip and a high-visibility colour.
The composite fiber in this glove is not designed for high heat. Nitrile foam has low flame resistance, is porous and can allow liquids through. Because the glove is only partially coated, it is not intended for immersion. It reduces cut and puncture risk according to the listed levels, but it cannot completely eliminate the risk of injury.
To help extend glove life, wash it in cold water, 85°F / 30°C, with a mild detergent. Rinse in cold water before drying, then dry at low temperature or air dry. Do not use bleach. Excessive heat can accelerate wear or crumbling of the nitrile coating.
Inspect the knit, coating, areas between the fingers and palm before each reuse. Replace the glove if the coating is cracked, if the knit is cut or if the protection no longer matches the real work hazard.
The original product text lists ASTM/ANSI A9 cut resistance, with level 3 abrasion and puncture resistance.
Yes, the item page lists touchscreen compatibility. Results can vary depending on the screen, glove condition and coating cleanliness.
Yes. The information provided for this model indicates that it is suitable for food handling while offering A9 cut protection.
No. Nitrile foam is porous and the glove is partially coated, so it is not intended for immersion or chemical protection.
It is available from double extra small (5) to triple extra large (12), according to the variants available on the item page.
To complete your hand protection, see the TenActiv™ A9 glove with leather reinforcement at the thumb and index finger crossing (GS21TXUFNLTC), the grey TenActiv™ A9 glove coated with nitrile foam (GS21TXUFN), the Emerald CX® A5 winter glove coated with PVC (GSCXTAPVC), the A9 stainless steel chain mail cut-resistant glove (G100), the TenActiv™ A7 glove with reinforced thumb (GSTACXPNRT) and the TenActiv™ A4 glove coated with nitrile foam (GSTAFGFNT). Under "Accessories" at the bottom of the page, add short Cutban™ cut-resistant sleeves (VSKPW14TH) or 18 in SureKnit® A8 cut-resistant sleeves (VSLSXB18MC).
Data sheet
You might also like