Orange traffic cone whit 2 collar, 28 in. long, weight: 7.5 lbs. Made from 100% PVC.

28 in orange PVC traffic cone with 2 reflective collars

The EPTCONE28B traffic cone helps make a traffic area, restricted access point, temporary obstacle or work perimeter visible. Its orange colour and two 4 in reflective collars improve identification in parking lots, docks, warehouses, worksites and maintenance areas. Made of PVC, this 28 in cone provides a taller marker than small cones while remaining easy to move and stack.

Features of the EPTCONE28B cone

This model is intended for temporary marking needs where cone visibility matters. The product data indicates a 28 in height, a 12 in x 12 in base and two reflective collars.

• Product code: EPTCONE28B.
• Type: traffic cone.
• Material: PVC.
• Colour: orange.
• Height: 28 in (71.1 cm).
• Reflective collars: two 4 in collars.
• Weight shown in name: 7.5 lbs; structured weight: 8 lb (3.6 kg).
• Structured dimensions: 12 in x 28 in x 12 in.

Applications for work areas, warehouses and parking lots

The EPTCONE28B cone can be used to frame a traffic lane, guide pedestrians, mark an intervention, signal a temporarily closed entrance or identify an area to avoid. It suits parking lots, garages, loading docks, workshops, warehouses, outdoor sites and events where a visible orange marker must be installed quickly.

Placement, inspection and cone care

Before installation, check that the cone is stable, clean and free of major cracks. The reflective collars should remain readable so they can keep acting as visual markers. Place cones according to the perimeter to mark, expected traffic, available visibility and the other control measures already in place. Replace damaged or overly worn cones.

FAQ about the EPTCONE28B orange cone

How tall is the EPTCONE28B cone?

The product data indicates a height of 28 in, or about 71.1 cm.

How many reflective collars does this cone have?

This model has two 4 in reflective collars.

What material is it made from?

The cone is made from orange PVC.

Which weight should be noted?

The existing name shows 7.5 lbs, while the structured product weight is 8 lb, or 3.6 kg.

Where can this cone be used?

It can be used in parking lots, docks, warehouses, work areas, temporary access points and maintenance perimeters.

Suggestions to complete cone marking

For a lower format, the 18in cone (EPTCONE) offers an 18 in height, the 28in cone (EPTCONE28) has one reflective collar, and the 36in cone (EPTCONE36) is useful when a 36 in height is preferred. The drum (EPTBA) helps channel a wider area.

To stabilize or light the perimeter, the base (EPTBAB) completes the drum, the lamp (LL177) adds a lighted marker, the strobe (LL2304) mounts on a cone, and the line with flags defines a longer perimeter.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.