compare_arrows

3 in floor marking dots, roll of 100

Reference : ECTPA3-BC
$21.45

This item is not kept in stock. Please allow 5 days for delivery.

Floor marking dots to define warehouse zones, mark inventory locations and guide pedestrian traffic. Through-colour vinyl with no printed ink to wear off, cut into a 3 in diameter circle. A clear protective film extends their service life in high-traffic areas, and the permanent adhesive holds on clean, dry floors. Six colours available. Made in Canada and sold on rolls of 100 dots of the same colour.

Color: White
Quantity

Compare

3 in floor marking dots, roll of 100

This item is not kept in stock. Please allow 5 days for delivery.

Available in six colours, on rolls of 100 dots of the same colour. Select the variant you need from the drop-down menu.

Sylprotec codeManufacturer modelColour
ECTPA3-BCVC300WWhite
ECTPA3-NOVC300KBlack
ECTPA3-VEVC300GGreen
ECTPA3-RGVC300RRed
ECTPA3-BLVC300BBlue
ECTPA3-JAVC300YYellow

These dots offer a quick and simple way to keep visual order on the floor: mark the edge of an aisle or zone, locate a bin, a pallet or an inventory area, or lay out a path that pedestrians follow from one point to another. Each 3 in diameter dot is made of through-colour vinyl: there is no printed layer to wear off. A clear protective film extends their service life even in high-traffic areas, and the permanent adhesive backing holds on most clean, dry floors. Distributors who resell them state that they meet the ANSI A137.1/A326.3 dynamic coefficient of friction test, performed dry. They come on a roll of 100, in six colours.

Features of the 3 in floor marking dots

  • Through-colour vinyl: no printed ink to wear off.
  • Clear protective film for extended service life in demanding environments.
  • Permanent adhesive backing for a secure hold on a clean, dry floor.
  • ANSI A137.1/A326.3 dynamic coefficient of friction test (dry), according to distributors.
  • 3 in diameter, on a roll of 100 dots of the same colour.

Available colours: six colours, on a roll of 100

Each roll holds 100 dots, 3 in in diameter, of the same colour: white, black, green, red, blue or yellow. The dots are sold by the roll, not in packs like the 6 in floor markers; order one roll per colour you need.

Floor marking dot applications

The manufacturer offers them to define warehouse aisles and zones, mark production flow and inventory areas, direct and guide pedestrians, and support Lean and 5S visual management systems. Match a colour to each use: one colour for inventory locations, another for a pedestrian path, another for emergency equipment. To mark a more visible spot or draw corners, crossings and lines, see the anti-slip disc (ECTR5SD6) textured 5S floor markers and the circle (ECTRHDD6) heavy-duty floor markers, designed for truck traffic; both ranges also come in I, L, cross and T shapes.

Floor marking dot technical specifications

FeatureDetail
ShapeCircle
Diameter3 in (7.62 cm)
Height (packaged dimensions)3.3 in (8.38 cm), package dimension, not the dot's
MaterialThrough-colour vinyl
FinishClear protective film
AdhesivePermanent
Application surfaceClean, dry floor
Slip testANSI A137.1/A326.3, dry dynamic coefficient of friction (according to distributors)
Available coloursWhite, black, green, red, blue and yellow
Country of originCanada
Sold byRoll of 100 dots of the same colour

Dot installation and care

Sweep, clean and let the floor dry: the permanent adhesive needs a clean, dry surface. Peel the dot from the roll, place it where needed, then press firmly right to the edges. Since the adhesive is permanent, use these dots for markers meant to stay in place. Replace a worn or lifted dot to keep the marking legible.

FAQ: 3 in floor marking dots

How many dots are on a roll?

Each roll holds 100 dots, 3 in in diameter, all of the same colour. For a colour code, order one roll per colour.

Do the dots hold up in high-traffic areas?

Yes. The through-colour vinyl has no printed ink to wear off, and the clear protective film extends their service life in demanding environments.

Are they slippery underfoot?

Distributors state that they meet the ANSI A137.1/A326.3 dynamic coefficient of friction test. This test is performed on a dry surface.

What kind of floor can they be applied to?

Most clean, dry floors. Clean and dry the surface before application for good adhesion.

What is the difference with floor markers?

The 3 in dot marks a spot or a path. For a larger spot or to draw corners, crossings and lines, the 6 in markers come in an anti-slip textured version for pedestrian walkways and in a beveled heavy-duty version for truck traffic.

Suggestions for zone and path marking

For the person who kneels to apply the dots, plan for the Impacto (VG100) all-purpose lightweight co-polymer foam knee pads and the TenActiv (GS13TAFNT) cut-resistant composite-knit glove with foam nitrile coating. The Privo 12261 (YA12261) clear polycarbonate protective eyewear protects the eyes, the Pioneer (V6676) 6676 high-visibility orange 13-pocket surveyor's vest keeps the installer visible in aisles with vehicle traffic, and the 3M Push-Ins (OA1000) polyurethane earplugs reduce ambient noise.

Three useful additions for floor marking are: Markal Pro-Line fine-tip paint marker (IPTCR), 28 in orange cone with reflective collar (EPTCONE28) and traffic channelizing barrel (EPTBA). Select them according to the layout and hazards present.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

ECTPA3-BC

Data sheet

Product group
Safety equipment
Main category
Sign and lock
Sub category
Cones and barricade tapes
Name of the product
Floor dot
Product code
ECTPA3
Sort by keywords
Marking tapes
Product use
Floor marking
Approved/Certified
ANSI A137.1/A326.3 (Dry)
Manufacturer
Incom Direct
Country of origin
Canada
Features
To mark zones and guide pedestrian traffic on the floor
Includes 2
Clear protective film
Mounting type
Permanent adhesive back
Form
Circular
Material
Vinyl
Length (in/cm)
3 in / 7.6 cm
Width (in/cm)
3 in / 7.6 cm
Height (in/cm)
3.3 in / 8.38 cm
Weight (lb/kg)
1.75 lb / 0.8 kg
Sold by
Roll of 100
Color
Variable depending on selection
HS Code
3919102055
Return conditions
Not returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
Caution
Apply to a clean, dry floor

Specific References

MPN
VC300W

You might also like

Comments (0)
No customer reviews for the moment.