3M
Gasket B061-35-04R01 for power flow respirator motor from 3M
RB061/35/04R01
$18.85
Seal Gasket for Powerflow Motor
The seal gasket for the Powerflow blower motor from 3M is an essential component to ensure the performance and safety of powered air-purifying respirators in asbestos environments. It provides a perfect seal between the motor and the casing, preventing any leakage of contaminated air.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Power Flow 3M Seal Gasket: Enhanced Safety for Powered Respirators
The seal gasket for the Powerflow blower motor from 3M RB024/00/02R01 is designed to maintain a hermetic barrier between the motor and the casing of the powered air-purifying respirator system. This replacement part is indispensable for asbestos removal and decontamination professionals using Powerflow powered respirators. By ensuring optimal sealing, it helps preserve the quality of filtered airflow and prevents any infiltration of hazardous particles.
Compatible with masks: (R6700PF) (R6800PF) and (R6900PF)
An essential control tool for 3M powered respirators.
Installing the seal gasket on the Powerflow blower motor
Installing the seal gasket is simple: just position it correctly between the blower motor and the respirator casing. Make sure the gasket is properly aligned and shows no cracks or deformations. Proper installation is essential to maintain system sealing and ensure effective respiratory protection.
Maintenance and Replacement of the Powerflow Seal Gasket
Regularly inspect the seal gasket for signs of wear, cracking, or loss of flexibility. Clean it with a soft, dry cloth after each use. If damaged, replace it immediately to prevent any leakage of contaminated air. A gasket in good condition is crucial for the proper functioning of the powered air-purifying respirator system.
Usage Tips for Asbestos Worksites
Always use genuine 3M parts to ensure compatibility and safety of your equipment. Before each use, check the condition of the seal gasket and make sure it is properly installed. Never use the blower motor without a gasket or with a damaged gasket. If in doubt, consult a respiratory protection specialist.
FAQ – Seal gasket for Powerflow blower motor 3M
Is this gasket compatible with all 3M blower motors?
No, it is designed exclusively for the Powerflow blower motor model RB024/00/02R01. Check compatibility before purchase.
How often should the seal gasket be replaced?
As soon as it shows signs of wear or deformation. Regular visual inspection is recommended.
Can a generic gasket be used instead?
It is strongly discouraged to use a non-certified 3M gasket, as this could compromise the sealing and safety of the system.
Complementary suggestions for the Powerflow blower motor seal gasket from 3M
Need additional safety equipment? See the following items: The CDN “Cartridge Respirator Required” sign (ECO106), statutory sign for Quebec construction sites involving asbestos (EAMIANTE), 3M high-efficiency filters with plugs (R450/01/01R20), replacement head harness (R6897), and replacement inhalation valves to prevent air leaks (R6893).
Under “Accessories” at the bottom of the page. If you are looking for equipment for work, check out the following products: Alcohol-free cleaning wipes for protective masks (R504), Motorized Blower units for Powered Air-Purifying Respirator systems (RB024/00/02R01) and 3M 6000 Series Prescription Lens Kit (R6878).
RB061/35/04R01
Data sheet
- Product group
- Safety equipment
- Main category
- Personal protection
- Sub category
- Respiratory protection
- Sub sub category
- 3M Powerflo face-mounted power air purifying respirator
- Name of the product
- Gasket
- Series of products
- Powerflo (Tm) respirator
- Product code
- RB061/35/04R01
- Approved/Certified
- Meets NIOSH
- Manufacturer
- 3M (TM)
- Country of origin
- United Kingdom
- Features
- Compatible with the blower motor for the 3M Powerflo (Tm) respirator
- Material
- Unknown material
- Washable
- Wash in warm water, 140°F/60°C with a mild soap (hand dish soap), rinse and disinfect with a Dakin solution (water with bleach), rinse thoroughly and let dry
- Length (in/cm)
- 2 in / 5.08 cm
- Width (in/cm)
- 2 in / 5.08 cm
- Height (in/cm)
- 1 in / 2.54 cm
- Weight (lb/kg)
- 0.25 lb / 0.113 Kg
- Color
- Gray
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
New
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
Seal Gasket for Powerflow Motor
The seal gasket for the Powerflow blower motor from 3M is an essential component to ensure the performance and safety of powered air-purifying respirators in asbestos environments. It provides a perfect seal between the motor and the casing, preventing any leakage of contaminated air.