Refill content for the TR04M kit conforming to CAN CSA Z1220 17

Replacement contents - TR04M kit compliant with CAN/CSA Z1220-17

For low-risk environments  51 to 100 workers

Case not included

Ensuring worker safety is an essential responsibility for any business. The replacement contents for the Sylprotec TR04M kit, compliant with CAN/CSA Z1220-17, allow you to upgrade your first aid kit and effectively meet the needs of a low- or moderate-risk workplace with 51 to 100 employees.

This kit is often referred to as a Type 2 kit or a “large basic kit” and contains all the essential supplies needed to respond quickly to minor or moderate incidents in the workplace.

General description of contents for kit TR04M 51 to 100 workers

This replacement content includes 20 different types of items, including bandages, sterile compresses, antiseptic swabs, triangular bandages, nitrile gloves, first aid instruments, and universal protective equipment.

This is the minimum content required by the CAN/CSA Z1220-17 standard, now in effect in Quebec and supported by the CNESST.

This regulatory update aims to harmonize Canadian first aid requirements. Employers must therefore ensure that their kits comply with these new requirements to guarantee an adequate response in the event of an incident.

Contents of the TR04M kit

• 100 Assorted fabric dressings (PS101)
• 24 Antibiotic topical ointments Bacitracin Zinc 0.9 gr. (PS208-6)
• 100 Antiseptic wipes (towelettes) with Benzalkonium chloride, 0.13% (PS215)
• 24 Individually wrapped hand cleaning wipes (PS681)
• 48 Sterile gauze pads, 7.6 X 7.6 cm (3 X 3 in) (PS302)
• 4 Rolls of KLEEN gauze 5 cm X 3.7 m (2 in X 12 ft) (PS313)
• 4 Rolls of KLEEN gauze 7.5 cm X 3.7 m (3 in X 12 ft) (PS314)
• 8 Sterile compress bandages with fasteners 10 X 10 cm (4 X 4 in) (PS319)
• 2 Abdominal compresses, sterile, individually wrapped, 12 X 22 cm (5 X 9 in) (PS321)
• 8 Triangular bandages 101 X 101 cm (40 X 56 in) with 2 safety pins (PS408)
• 1 Hypoallergenic adhesive tape 2.54 cm X 9.1 m (1 in X 30 ft) (PS415)
• 1 Stainless steel bandage scissors with angled blades, rounded tip 14 cm (5.5 in) (PS701)
• 1 Ultra-fine stainless steel splinters forceps 11.4 cm (4 1/2 in).  (PS725)
• 1 Disposable rescue blanket 204 X 140 cm (56 X 80 in) (PS713)
• 1 Barrier device for cardiopulmonary resuscitation (CPR) (PS854)
• 16 Powder-free nitrile gloves 4 mils, wide, one size fits all (PS706)
• 2 Biomedical waste bags 15.2 X 22.9 cm (6 X 9 in) (PS827-1)

Note on the conformity of this kit :

In Quebec, the minimum content of a first aid kit has recently been modified. The new contents are now based on the Canadian regulation CAN/CSA Z1220-17. You will be able to consult on the CNESST website the information concerning the material required for the personal kit as well as the information related to isolated workers.

Special features of replacement contents for low-risk first aid kits

The TR04M kit is recognized for its reliability and strict compliance with CAN/CSA Z1220-17, ensuring that every item included meets current Canadian requirements for low-risk work environments.

It ensures a quick, clean, and safe response to cuts, skin irritations, minor injuries, bleeding, or to stabilize a situation before emergency services arrive.

Application of the TR04M first aid kit

1. Open the kit: make sure you have a clean, stable space to place the kit. Open it completely to see all the contents.
2. Identify the need: assess the emergency situation and determine which items will be needed to treat the injury or health problem.
3. Use the appropriate items: follow the instructions included with each item. For example, use bandages to cover wounds, compresses to stop bleeding, and antiseptics to clean wounds.
4. Act calmly and quickly: be sure to remain calm and work quickly to minimize damage.
5. Consult professionals if necessary: in the event of a serious injury, use first aid supplies to stabilize the situation while waiting for professional help to arrive.

Maintenance and shelf life of first aid supplies

To keep a kit effective at all times, it must be stored in a dry, temperate place that is easily accessible to all employees.

It is essential to regularly check expiration dates, replace used supplies, and avoid exposing items to heat, sunlight, or corrosive substances.

Proactive management ensures that the kit will be functional when needed.

Note on the compliance of this kit :

In Quebec, the minimum contents of a first aid kit have recently been changed. The new contents are now based on Canadian regulation CAN/CSA Z1220-17. You can consult the CNESST website for information on the equipment required for personal kits and information on isolated workers.

FAQ – TR04M Replacement Contents (CAN/CSA Z1220-17 – 51 to 100 workers)

1. What exactly are TR04M replacement contents used for?

They are used to upgrade a first aid kit for a workplace with between 51 and 100 employees.

All items included comply with CAN/CSA Z1220-17, ensuring that your organization remains compliant with current first aid requirements while having the essentials to respond quickly to minor or moderate injuries.

2. Is the content sufficient to cover all emergencies?The TR04M kit is designed for low- to moderate-risk environments.

It provides all the necessary supplies to treat cuts, abrasions, minor bleeding, irritations, minor burns, light immobilization, and measures to take while waiting for emergency services. For higher-risk environments or those requiring advanced interventions, Sylprotec offers additional kits such as the TRAUMA kit.

3. Why is the CAN/CSA Z1220-17 standard important?

This standard is now the Canadian benchmark for determining the minimum contents of a first aid kit based on the number of workers and the level of risk. It replaces previous recommendations and ensures national consistency.

In Quebec, the CNESST relies on this standard to establish its requirements. The TR04M therefore strictly complies with this regulatory framework.

4. Is the case included?

No. This product only includes the contents. It is a refill kit to update your existing kit. If you need the complete case, Sylprotec offers complete, ready-to-use kits.

Suggestions for products that complement the contents of kit TR04M

Need additional safety equipment? See the items; First-aid kit (TR01), Benzalkonium chloride antiseptic pad (PS215), antiseptic spray solution (PS212) SAM multipurpose splint (SAM Splint) in foam with aluminum frame, 10.8 X 61 X 0.5 cm (PS797), 28-item CNESST-compliant first-aid kit Ideal for trauma treatment (TRAUMA), Triangular cotton bandage, 40 X 56 in, sold individually (PS408).

Under “Accessories” at the bottom of the page. If you're looking for work equipment, see the following products: Earplugs (OA101) and 3M N95 respirators (R8210).

Texts colored green correspond to hyperlinks leading to specific safety equipment or general information.