- New
This item is not kept in stock. Please allow 15 days for delivery.
Red Justrite 10575 bench can in 24-gauge coated steel, 2 gal capacity, with spring-loaded perforated plate, hinged cover, protected rim and built-in flame arrester. FM approved.
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Manufacturer code Justrite: 10575, model 10575
This item is not kept in stock. Please allow 15 days for delivery.
The red Justrite 10575 bench can, 5-7/8 in high and 11-1/2 in outer diameter, lets small parts be dipped directly at the workstation. The spring-loaded perforated plate is used to press parts into the liquid, agitate them, then let them drain when pressure is released. The hinged cover helps limit evaporation, the protected rim supports handling and the built-in flame arrester suits shops handling flammable liquids in small volumes.
Use this bench can on a mechanical, maintenance or repair workbench where small parts need to be dipped and drained. Its low format sits near the operator without taking the space of a larger tank.
Keep the cover closed when the bench can is not in use, clean the perforated plate and check the rim. Empty and service the container according to facility procedures for the liquid being used.
No. It is a bench can with a spring-loaded plate, designed for small parts.
The published capacity is 2 gal.
Press the perforated plate to dip and agitate parts, then release it to drain them.
This bench can is FM approved.
Model 10575 is red. It measures 5-7/8 in high and 11-1/2 in outer diameter, approximately 14.9 cm and 29.2 cm.
For the shop lead preparing a small-parts dipping station, plan for a yellow 6-in-1 winter high-visibility vest (VV55J), Nemesis blue mirror glasses (YA3300), Kevlar and Lycra inspector gloves (G120) and 3 in X 1000 ft red Danger tape (ECT3RE9) to limit access around the bench. The valved 3M 8271 P95 mask (R8271) may be considered for certain particulates during a task separate from this intervention, following a risk assessment and fit verification, with no protection against gases or vapours. For those contaminants, select the respirator and cartridges according to the SDS and risk assessment.
For the same station, pair the Cease-Fire waste (WA26606G) can with area waste, the AccuFlow type II can (WB7225320) for controlled carrying and the 6 ft grounding wire (WAC08600) for bonding. The 22 gal Justrite bench (WD975) can and 6 in safety funnel (WE08207) cover other dipping or transfer needs.
Data sheet
You might also like