- New
This item is not stocked: allow 10 to 13 days for delivery.
Red Brady 170481 clamping cable lockout for a wide variety of ball, gate and butterfly valves. Its trigger clamp operates with one hand, and its interchangeable steel or rubber jaws adapt to the handle. The 8 ft (2.44 m) sheathed cable wraps around a fixed counterpoint, and four holes receive up to 4 padlocks. The bottom hole also accepts a hasp for larger groups. Padlocks sold separately.
Brady model: 170481.
This item is not stocked: allow 10 to 13 days for delivery.
This red device combines a clamp and a cable to lock out ball, gate and butterfly valves in tight spaces. The clamp grips the handle, then the 8 ft (2.44 m) sheathed cable reaches a fixed counterpoint, such as the neighbouring pipe or a hook, to block movement in the opening direction. Once the cam door is closed, the cable can be pulled tight, but never loosened. The same version comes in green: the device (CACC170482).
| Feature | Detail |
|---|---|
| Manufacturer | Brady |
| Model | 170481 |
| Device material | Fiberglass-reinforced nylon |
| Cable | PVC-coated steel, 8 ft (2.44 m), 0.125 in (3.18 mm) in diameter |
| Valve types | Ball, gate and butterfly |
| Accepted handle | At most 2 in (50.8 mm) thick and 2.78 in (70.6 mm) wide |
| Number of padlocks | Up to 4, with a shackle of at most 0.28 in (7.11 mm) |
| Padlock holes | 4, including a hasp-compatible bottom hole |
| Device height | 6.98 in (177.3 mm) |
| Device length | 8.58 in (217.9 mm) |
| Device width | 2.55 in (64.8 mm) |
| Packaged dimensions | 20.2 X 20.1 X 4.5 in |
| Packaged weight (supplier) | 5.3 lb (2.40 kg) |
| Service temperatures | 0 to 250 °F (-17.78 to 121.11 °C) |
| Colour | Red |
| Sold by | Unit |
| Country of origin | China |
The device protects against mechanical risk during valve isolation, particularly in a pump room or on a pipe where space is limited. A fixed counterpoint is mandatory: a pipe, hook or other solid point on the other side of the handle. Follow the facility's written lockout program.
Turn the valve to the desired position. Orient the top of the device toward the fixed counterpoint, place the handle between the jaws and squeeze the trigger until the clamp is tight. Thread the cable around the counterpoint and then through the cams, close the door, pull the cable tight and apply a padlock to one of the four holes. To take off the device, remove the padlock, open the door and press the lever that releases the clamp.
A wide variety of ball, gate and butterfly valves, with a handle at most 2 in (50.8 mm) thick and 2.78 in (70.6 mm) wide.
To block handle movement in the opening direction: a pipe, hook or other solid fixed point.
Yes: an 8 ft (2.44 m) PVC-coated steel cable. Padlocks are sold separately.
The steel jaws are durable, and the rubber jaws minimize scratches. The two are interchangeable.
The manufacturer states service temperatures from 0 to 250 °F (-17.78 to 121.11 °C).
For the operator isolating a valve in a pump room, plan for Uvex Genesis anti-fog clear safety glasses (YAU3200), cut and impact protection gloves (GMXVSBE), a Delta Plus Independence type 1 class E hardhat (TA14LR), 3M E-A-R 25 dB push-in earplugs (OA2100) and Impacto all-purpose lightweight kneepads (VG100).
To complete your lockout equipment, the ABUS keyed-alike padlocks (CA72IB40KA3) come in a pack of 3. The French DANGER NE PAS OUVRIR tags (CAET7) are sold in packs of 25. For valves, the adjustable ball valve (CAV8) lockout for 1/2 to 2 in and the locking device for faucet handles (CAV7) are sold separately. For pneumatic equipment, the pneumatic (CAP1) lockout completes the set. Check the shackle fit in the device and your procedure requirements before selecting these separately sold accessories. A tag does not replace the isolating device or energy verification.
Data sheet
Specific References
You might also like