- New
This item is not stocked: allow 10 to 13 days for delivery.
Green Brady 170482 clamping cable lockout that secures ball, gate and butterfly valves, even where space is limited. The trigger clamp tightens on the handle with one hand, then the 8 ft (2.44 m) sheathed cable attaches to a fixed counterpoint. Supplied with steel or rubber jaws, it offers four holes for 4 padlocks. The bottom hole also accepts a hasp for larger groups. Padlocks sold separately.
Brady model: 170482.
This item is not stocked: allow 10 to 13 days for delivery.
The green version of this device combines a clamp and an 8 ft (2.44 m) sheathed cable to lock ball, gate and butterfly valves. The clamp tightens on the handle and the cable reaches a fixed counterpoint, such as a nearby pipe, to prevent the valve from opening. The cam wheels grip the cable, and the cam door prevents it from being loosened. It also comes in red: the device (CACC170481).
| Feature | Detail |
|---|---|
| Manufacturer | Brady |
| Model | 170482 |
| Device material | Fiberglass-reinforced nylon |
| Cable | PVC-coated steel, 8 ft (2.44 m), 0.125 in (3.18 mm) in diameter |
| Valve types | Ball, gate and butterfly |
| Accepted handle | At most 2 in (50.8 mm) thick and 2.78 in (70.6 mm) wide |
| Number of padlocks | Up to 4, with a shackle of at most 0.28 in (7.11 mm) |
| Padlock holes | 4, including a hasp-compatible bottom hole |
| Device height | 6.98 in (177.3 mm) |
| Device length | 8.58 in (217.9 mm) |
| Device width | 2.55 in (64.8 mm) |
| Packaged dimensions | 20.2 X 20.1 X 4.5 in |
| Packaged weight (supplier) | 5.3 lb (2.40 kg) |
| Service temperatures | 0 to 250 °F (-17.78 to 121.11 °C) |
| Colour | Green |
| Sold by | Unit |
| Country of origin | China |
The device suits the process technician who must lock a valve on a plant pipe, where a rigid device does not fit. The green colour makes identification easier according to your facility's colour code. The fixed counterpoint remains essential on the other side of the handle. Follow the facility's written lockout program.
Place the valve in the desired position, orient the top of the device toward the counterpoint, then tighten the clamp on the handle with the trigger. Pass the cable around the counterpoint and through the cams, close the door, pull the cable tight and apply a padlock. To remove it, take off the padlock, open the door and press the lever. Replace a damaged cable.
Squeeze the clamp, thread the cable, close the door, pull the cable tight and apply a padlock.
Ball, gate and butterfly valves with a handle at most 2 in (50.8 mm) thick and 2.78 in (70.6 mm) wide.
No. The cable can be pulled tight, but it does not loosen while the door stays closed.
Up to 4, with a shackle of at most 0.28 in (7.11 mm). The bottom hole also accepts a hasp.
The manufacturer states service temperatures from 0 to 250 °F (-17.78 to 121.11 °C).
For the process technician, plan for 3M Privo clear polycarbonate safety glasses (YA12261), Dexterity A3 Kevlar cut-resistant gloves (GS13KFNT) with foam nitrile coating, an MSA Super V type 2 class E hardhat (TA82), Honeywell Firmfit 30 dB disposable earplugs (OA1105) and Impacto soft rubber kneepads (VG104).
To complete your lockout equipment, the ABUS keyed-alike padlocks (CA72IB40KA5) come in a pack of 5. The French DANGER NE PAS DÉMARRER tags (CAET8) are sold in packs of 25. On piping, the adjustable ball valve (CAV9) lockout for 2 to 8 in and the rotating gate (CAV) valve lockout for 1 to 13 in diameters are sold separately. For distant points, the Master Lock adjustable (CACCS806CBL) cable lockout comes in 3, 10 and 15 ft. Check the shackle fit in the device and your procedure requirements before selecting these separately sold accessories. A tag does not replace the isolating device or energy verification.
Data sheet
Specific References
You might also like