compare_arrows

STOP textured anti-slip floor sign, 17 in octagon

Reference : EDSTOP17
$36.65

This item is not kept in stock. Please allow 5 days for delivery.

Red and white 17 in octagonal STOP floor sign, to mark a stop point at aisle intersections, doors and pedestrian traffic areas in plants, warehouses and stores. Made of 1/32 in (0.79 mm) thick adhesive vinyl with a textured protective film, it offers a slip-resistant surface that helps reduce the risk of slips. The sub-surface printed graphics resist foot traffic wear, and the strong adhesive holds on clean, dry, smooth floors.

Quantity

Compare

STOP textured anti-slip floor sign, 17 in octagon

Manufacturer code Incom Direct: FS1031V

This item is not kept in stock. Please allow 5 days for delivery.

This red and white octagonal floor sign marks a stopping point where pedestrians must stop and look: aisle intersections, rack exits, swinging doors, crossings in front of a dock or a forklift zone. It is made of premium adhesive vinyl covered with a thick textured protective film, which provides an anti-slip surface and stands up to heavy foot traffic; the sign is 1/32 in (0.79 mm) thick. The graphics are printed under the surface and stay sharp over time. The strong adhesive holds it on clean, dry, smooth floors. Made in Canada, it is sold individually.

STOP anti-slip floor signage

  • 17 in red and white octagon, recognizable from a distance.
  • Textured anti-slip protective film that reduces the risk of slips.
  • Graphics printed under the surface, protected from foot-traffic wear.
  • Strong adhesive for clean, dry, smooth floors.
  • 1/32 in thick adhesive vinyl, designed for heavy foot traffic.
FeatureDetail
Sylprotec codeEDSTOP17
Manufacturer code Incom DirectFS1031V
MessageSTOP
Shape and dimensions17 in (43.18 cm) octagon
Thickness0.03125 in (1/32 in, 31.25 mil, 0.79 mm)
ColoursRed and white
MaterialAdhesive vinyl, textured anti-slip protective film
PrintingSubsurface, resistant to foot-traffic wear
AdhesiveStrong, for clean, dry, smooth floors
Country of originCanada
Sold byUnit

STOP floor sign applications

The manufacturer recommends it for workplace hazard and safety communication, wayfinding, general notices and heavy pedestrian traffic areas in industrial and commercial settings: manufacturing plants and production shops, warehouses and distribution centres, retail stores, healthcare facilities, schools and public buildings. Placed before an aisle intersection or a door, it reminds pedestrians to stop and check for forklift traffic. It is a floor sign for pedestrian traffic: it does not replace a road traffic sign.

Floor sign installation and care

Sweep, clean and degrease the floor, then let it dry: the adhesive requires a clean, dry, smooth floor. Place the sign in plain view, just before the point where pedestrians must stop, remove the protective liner and press it firmly from the centre to the edges. Sweep and wash the floor around the sign regularly, and replace it if an edge lifts or the surface is too worn.

FAQ: STOP floor sign

Is the sign slippery?

No. Its textured protective film provides an anti-slip surface designed to reduce the risk of slips in heavy pedestrian traffic areas.

Does the message wear off with traffic?

The graphics are printed under the laminated surface, which protects them from foot-traffic wear.

What size is the sign?

It is a 17 in (43.18 cm) octagon, 1/32 in (0.79 mm) thick, sold individually.

What floor can it be applied to?

A clean, dry, smooth floor. Clean and dry the surface before application for good adhesion.

Can it be used as a stop sign on a road?

No. It is a floor sign for pedestrian traffic areas; for a yard or an outdoor lane, use a road traffic sign.

Suggestions for the STOP floor sign

For the safety coordinator who applies the sign on their knees at an aisle intersection, plan for the Impacto (VG103) Gelite hard shell knee pads with gel cushion, the Endura (G404) cowhide driver gloves, the Uvex (YAU3200) Genesis safety glasses with clear anti-fog lens, the Pioneer (V6672) 6672 orange class 2 surveyor vest near forklifts, and the Max Lite (OA1102) uncorded disposable earplugs.

To complement your equipment: Acrylic full dome convex mirror, for 360-degree view in an intersection (M86); Acrylic half dome convex mirror, for 180-degree view in a T-intersection (M88) and Round "Keep your distances" anti-skid vinyl floor sign, 18 in (EDCOVID).

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

EDSTOP17

Data sheet

Product group
Safety equipment
Main category
Sign and lock
Sub category
Traffic and transport
Sub sub category
Traffic safety accessories
Name of the product
Octagonal floor sign
Product code
EDSTOP17
Sort by keywords
Industrial traffic signs
Product use
Floor marking
Manufacturer
Incom Direct
Country of origin
Canada
Thickness in mils
31.25 mils
Choice of format
17 x 17 in / 43.18 x 43.18 cm
Features
STOP message for pedestrian floor marking
Additional Features
Textured anti-slip surface
Mounting type
Adhesive application
Form
Octagon
Material
Vinyl
Dimensions of the product
17 x 17 in / 43.18 x 43.18 cm
Length (in/cm)
17 in / 43.18 cm
Width (in/cm)
17 in / 43.18 cm
Height (in/cm)
0.04 in / 0.10 cm
Weight (lb/kg)
0.25 lb / 0.113 kg
Availability
Allow 5 days for delivery
Sold by
Unit
Color
Red/White
Made in Canada
Yes
HS Code
3919905060
Return conditions
Not returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
Caution
Apply to a clean, dry, smooth floor

Specific References

MPN
FS1031V

You might also like

Comments (0)
No customer reviews for the moment.