High-visibility traffic control waterproof pants in compliance with the new Transports Québec P4.34.1 standard pertaining to road work signage.
These pants are available in many sizes from extra small (XS) to four extra large (4XL). Select your size in the drop-down menu above.
Pioneer® Product Code: V1190460
These fluorescent yellow flagman pants meet the new Transports Québec standard which came into effect in December 2014. It is also meets CSA Z96-15, Class 3 standard requirements if worn with matching high-visibility traffic control waterproof safety coat (see item VP18).
This 300-denier oxford polyester safety wear has been lined with polyurethane (PU) to provide water-resistance. The manufacturer grants this product a waterproof rating of 5,000 mm, i.e. it can withstand the pressure of a 5 m water column. A waterproof rating is granted when a material has been tested under the pressure of a cylinder filled with water, in this case, 5 m high of water. This height defines the limit at which the material stops being resistant and water starts passing through.
All seams have been taped and heat-sealed.
Reflective stripes and visibility:
These water-resistant pants have been provided with altering silver retroreflective stripes and fluorescent orange stripes. Each one of them has a width of 50 mm (2 in.). These pants have three horizontal stripes around the ankles.
Fluorescent yellow (or that safety greenish yellow) is quite visible during daylight and in poor natural light conditions, e.g. at dawn or dusk. In most cases, this yellow ensures a high contrast with most backgrounds. Since bright yellow is lighter than orange, it can be perceived more easily at night, yet reflective stripes will always be best in the dark.
Fluorescent orange is quite visible during daylight and in bright artificial lighting conditions. In most cases, it ensures a high contrast with most backgrounds. However, bright orange is less visible at night and in poor lighting conditions, be it natural or artificial, e.g. at dawn or dusk.
Silver retroreflective stripes are the most visible there is in poor lighting conditions, be it natural or
These pants feature belt loops for a personalized adjustment, and a press stud
These PU lined oxford polyester pants are said to be manufactured with a 300-deniers yarn; in layman’s terms, it is a medium-weight protective wear which is lightweight enough to offer comfort but is heavyweight enough to offer an effective protection. By definition, 300 deniers refer to the weight in grams of 9,000 m of the yarn used to make these pants, that is, 300 deniers equal 300 g. The manufacturer, Pioneer®, is unable to provide the polyurethane liner’s thickness.
Polyurethane-lined waterproof safety wear is usually worn by workers who may be exposed to remote risks of chemical splashes. PU is lightweight and porous; it’s thus ideal to manufacture light and breathable workwear. Yet, during heavy rains and windstorms, PU tends to get waterlogged and lose all its water-resistant property. Once overloaded, polyurethane lets water leach into the pants under any pressure, e.g. by leaning on something or bending over. Given the responsibilities flagmen take, breathable pants are a must.
These pants should always be machine-washed in a delicate setting with cold or lukewarm water, and a gentle soap. Never use bleaching agents or fabric softeners on these pants. They should also be air-dried in a sheltered spot out of direct sunlight. Never tumble dry, iron or dry clean this raincoat.
You can obtain the flagging rain coats under product code VP18. Depending on the season, you can get the summer pants (VV19) or the winter pants (VV56P). You may also need other complementary items such as the flag (EFLA17), the stick (EFLAB) or the safety helmet (TA14LRHV). You can find these products by moving your cursor to the bottom of the product page.
|Type of product
|Sub sub category
|Traffic safety clothing
|Name of the product
|Pantalon haute visibilité pour signaleur
|Series of products
|Complies with standard P4.34.1 issued by Transports Québec - Complies with CSA Z96-15, class 2 and class 3
|Country of origin
|Fineness of the knitting
|Choice of format
|Size extra small (XS) to 4 extra large (4XL) available
|Reusable with prior hygienic measurement
|With alternating silver retroreflective and fluorescent orange stripes (50 mm / 2 in. wide), located at ankle height
|Equipped with two side pockets and four cargo pockets with hook-and-loop closure
|Side vents near the ankles, adjustable with zippers, allow for greater comfort in hot weather
|Precision on the color of the material and their visibilities
|Fluorescent yellow (safety yellow-green) is highly visible during the day and in conditions with little natural light, such as dawn and dusk. In most situations, it also provides high contrast with the background
|The manufacturer grants this product a waterproof rating of 5000 mm. All seams have been taped and heat-sealed
|Equipped with a belt loop and fly with hook-and-loop closure
|Property of the material
|Polyester fiber has the property to retain the coloration
|The reflective strips are made of StarTech
|Machine wash on delicate with cold or lukewarm water and a mild detergent. Do not use whiteners, bleach, or fabric softener. Air dry. Do not expose to sunlight. Do not machine dry. Do not iron. Do not dry-clean
|Before/after washing tips
|Before washing, be sure to empty all garment pockets and close all zippers, snaps and hook-and-loop fasteners. After washing, shake the garment to remove wrinkles and hang to dry in a cool, well-ventilated place
|Dimensions of the product
|The dimensions of the product depend on the size selected by the customer.
|12 in / 30.48 cm
|6 in / 15.24 cm
|6 in / 15.2 cm
|2 lb / 0.9 Kg
|Another packaging available
|5 units per box
|No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page