Striped adhesive warning tape, black and yellow 2 in X 48 ft, (50 mm x 16 m).

Black and yellow adhesive warning tape 2 in x 48 ft

The ECT750 adhesive warning tape helps draw attention to ramps, stairs, floors and areas where pedestrian traffic is important. Its black and yellow striped pattern creates a high-contrast visual marker for an edge, level change, area to avoid or passage to frame. The tape is 2 in wide and 48 ft long, or 50 mm x 16 m according to the existing product information.

Printed on PVC adhesive tape and covered with a clear film, it combines visibility, adhesion and surface protection for common indoor or sheltered marking uses. Product code: ECT750.

Features of the ECT750 warning tape

This adhesive marking tape is designed to provide a simple, quick visual indication in traffic areas.

• Product code: ECT750.
• Type: adhesive warning tape.
• Colour: black and yellow.
• Width: 2 in / 5.08 cm.
• Indicated length: 48 ft / 16 m.
• Indicated material: PVC.
• Finish: printed and covered with a clear film.
• Structured weight: 0.75 lb / 0.34 kg.
• Sold by unit.

Applications for ramps, stairs and floors

The ECT750 tape is suited to visual marking of walking areas, ramps, thresholds, stairs, passages, machine surroundings and floors where a black and yellow contrast helps workers or visitors identify a boundary. It is especially useful where pedestrian traffic is predominant.

Application, surface and tape maintenance

Apply the tape to a clean, dry surface compatible with the adhesive. Press firmly along the full length to promote adhesion, then inspect the edges, wrinkles and wear regularly. Replace the tape when it lifts, loses contrast or no longer clearly signals the intended area.

FAQ about black and yellow adhesive tape

What size is the ECT750 tape?

The product information indicates 2 in x 48 ft, or 50 mm x 16 m.

What is the black and yellow pattern for?

It creates warning contrast to mark an edge, boundary, passage or area that needs attention.

Is the tape adhesive?

Yes. The product information indicates PVC adhesive tape.

Where can it be used?

It can be used on ramps, stairs, floors and high pedestrian traffic areas when the surface is clean and compatible.

When should it be replaced?

Replace it if it lifts, tears, loses contrast or no longer provides clear visual marking.

Suggestions to complete marking and traffic safety

For other marking tapes, the red tape (ECT750R) offers another colour combination, the anti-slip model (ECT749) adds a traction surface, the black tape (ECT748) suits low-traffic areas, and the danger barricade tape (ECT3RE9) is used for temporary marking.

To complete a traffic area, the line with flags (EFLAC) defines a perimeter, the yellow danger tape (ECT3YE7) adds another marking colour, the cone (EPTCONE) marks corners or passages, and the wet floor sign (ETR01) warns of a wet floor.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.