- New
This item is not kept in stock. Please allow 5 days for delivery.
Pack of 10 black 6 X 24 in anti-slip treads with a yellow reflective stripe, to make steps, floors, platforms and equipment safer and more visible. Their 60 grit surface reduces slip risk, the stripe printed below the grit resists wear, and the rounded corners prevent lifting. The acrylic adhesive bonds to clean, dry surfaces, indoors and outdoors, and resists water, chemicals and oil.
Manufacturer code Incom Direct: SG3126REF
This item is not kept in stock. Please allow 5 days for delivery.
These pre-cut anti-slip treads reduce the risk of slips on steps, platforms, floors and equipment surfaces, while marking the edge of the area. Their black 60-grit surface provides lasting traction, and a yellow reflective strip sends back the light that strikes it in poorly lit areas. The strip is printed under the grit surface, which protects it from wear, and the rounded corners keep the treads from lifting or fraying. The acrylic adhesive holds them on clean, dry surfaces; resistant to water, chemicals and oil, they suit indoor and outdoor use. Made in Taiwan, they are sold in packs of 10 treads of 6 X 24 in.
For the nosings of a service stairway, machine platforms, walkways, dock ramps and equipment surfaces, wherever traction and visibility matter. The manufacturer designs them for commercial, industrial and specialty installations, including original equipment (OEM) and long-term installations. The reflective strip helps locate the edge of a step in a poorly lit stairway or dock, when a flashlight or headlights fall on it. For a yellow strip that is visible by day, with no reflective function, choose the high-visibility anti-slip treads (ECTBA6HV) 6 X 24 in, pack of 10.
| Feature | Detail |
|---|---|
| Sylprotec code | ECTBA6REF |
| Manufacturer code Incom Direct | SG3126REF |
| Material | PVC film and aluminum oxide grit |
| Grit | 60 |
| Dimensions | 6 X 24 in (15.24 X 60.96 cm), rounded corners |
| Thickness | 0.80 mm (about 31.5 mil) for the grit tape and adhesive, excluding the release liner |
| Colour | Black with yellow strip |
| Visibility function | Reflective strip |
| Adhesive | Acrylic, for clean, dry surfaces |
| Resistance | Water, chemicals and oil |
| Use | Indoor and outdoor |
| Tests and compliance stated by the manufacturer | NFSI 101-A "High Traction" certification; meets or exceeds OSHA 1910.24 and 1910.26, ANSI A137.1/A326.3 (dynamic coefficient of friction, dry and wet) and AS/NZS 4586 (pendulum test, dry and wet) |
| Country of origin | Taiwan |
| Sold by | Pack of 10 treads |
Clean and degrease the surface, then let it dry: the acrylic adhesive requires a clean, dry substrate. Place the tread where needed, with the reflective strip on the side to be marked, then press it firmly over its whole surface, pressing hard on the rounded corners. Clean the treads regularly to keep the grit effective and the strip visible, and replace a worn or lifting tread.
The pack holds 10 treads of 6 X 24 in, black with a yellow reflective strip.
Yes. The manufacturer states they resist water, chemicals and oil, for indoor and outdoor use.
The manufacturer states NFSI 101-A "High Traction" certification and that the treads meet or exceed OSHA 1910.24 and 1910.26, the ANSI A137.1/A326.3 dynamic coefficient of friction test, dry and wet, and the AS/NZS 4586 pendulum test, dry and wet.
Both versions have the same black 60-grit surface, the same format and the same pack of 10. This one carries a yellow reflective strip, which sends back the light of a flashlight or headlights; the high-visibility version (ECTBA6HV) carries a yellow high-visibility strip, clearly visible by day but not reflective.
Clean, dry surfaces: steps, platforms, floors and equipment. Clean and dry the substrate before application.
For the maintenance attendant who applies the treads to steps and dock ramps, plan for the Impacto (VG102) skid-proof, non-marking hard shell knee pads, the high-quality cowhide (G300) and cotton gloves with tough cuffs, the Bollé (YRUSHPPSI) Safety Rush clear Platinum glasses, the fluorescent (VV50) orange adjustable CSA Z96 class 2 traffic vest on the docks and the Ranpro (VC105FUL) Ultra waterproof polyurethane boots for outdoor ramps.
Three useful additions for installation on steps and ramps are: black anti-slip tape (ECT748), yellow and black self-adhesive warning tape (ECT750) and 25 in wet floor warning sign (ETR01). Select them according to the layout and hazards present.
Data sheet
Specific References
You might also like