- New
This item is not kept in stock. Please allow 5 days for delivery.
I-shaped heavy-duty floor markers to draw dashed lines, aisle edges and the sides of pallet positions or staging zones as part of a 5S program. Made of 0.055 in through-color rigid polyethylene, cut into a 6 X 2 in I shape. The beveled edges reduce impact from forklift wheels, and the ultra-tacky adhesive holds on clean, dry, smooth floors. Seven colours available. Made in the United States and sold in packs of 10 markers of the same colour.
This item is not kept in stock. Please allow 5 days for delivery.
Available in seven colours, in packs of 10 markers of the same colour. Select the variant you need from the drop-down menu.
| Sylprotec code | Manufacturer model | Colour |
|---|---|---|
| ECTRHDI-BL | ASM100B | Blue |
| ECTRHDI-VE | ASM100G | Green |
| ECTRHDI-NO | ASM100K | Black |
| ECTRHDI-OR | ASM100N | Orange |
| ECTRHDI-RG | ASM100R | Red |
| ECTRHDI-BC | ASM100W | White |
| ECTRHDI-JA | ASM100Y | Yellow |
These I-shaped floor markers draw, dash by dash, the lines that organize a warehouse or plant floor: aisle edges, sides of pallet positions, staging zones and forklift lanes. Each 6 X 2 in marker is cut from 0.055 in (1.397 mm) thick through-color rigid polyethylene: the colour runs through the full thickness of the marker. The beveled edges reduce impact from forklift and pallet jack wheels, and the ultra-tacky, heavy coat weight adhesive bonds securely to most clean, smooth floors. Sold in packs of 10, they come in seven colours to build a colour code.
Each pack holds 10 I-shaped markers of the same colour, coloured through their full thickness: blue, green, black, orange, red, white or yellow. To build a 5S colour code, order one pack per colour. The same seven colours are available in the other heavy-duty marker shapes: L, cross (+), T and 6 in circle.
The manufacturer designed these markers for 5S and Lean floor organization: pallet positions and staging zones in warehouses, forklift traffic paths and work cells, production, sorting and material flow identification. The I shape is a dash used to draw a line, an aisle edge or the side of a zone. To complete the layout, see the L-shaped (ECTRHDL) heavy-duty floor markers for corners, the cross-shaped (+) heavy-duty floor markers (ECTRHDC) for crossings, the T-shaped (ECTRHDT) heavy-duty floor markers for junctions and the 6 in circle (ECTRHDD6) heavy-duty floor markers for spot markers. For pedestrian walkways, the anti-slip I-shaped (ECTR5SI) textured 5S floor markers, sold in packs of 25, come in the same shape.
| Feature | Detail |
|---|---|
| Shape | I |
| Dimensions | 6 X 2 in (15.24 X 5.08 cm) |
| Material | Through-color rigid polyethylene |
| Thickness | 0.055 in (55 mil) |
| Edges | Beveled |
| Adhesive | Ultra-tacky, heavy coat weight |
| Application surface | Clean, dry, smooth floor |
| Available colours | Blue, green, black, orange, red, white and yellow |
| Country of origin | United States |
| Sold by | Pack of 10 markers of the same shape and colour |
Clean the floor and let it dry before application: the adhesive bonds to most clean, dry, smooth surfaces. Place the marker where needed, then press firmly over its whole surface right to the edges. Sweep aisles regularly to keep the markers clearly visible. When a layout changes, they remove cleanly with minimal adhesive residue; plan to clean the floor if any marks remain. Replace a marker if an edge lifts or if it is too worn to stay clearly visible.
Yes. Their beveled edges reduce impact from forklift and pallet jack wheels, and the 0.055 in rigid polyethylene resists wear, impact and abrasion.
Most clean, dry, smooth floors. Clean and dry the surface before application for good adhesion.
Yes. The manufacturer states that they remove cleanly, with minimal adhesive residue. Plan to clean the floor if any marks remain.
No. Each pack holds 10 markers of the same shape and the same colour. Choose the colour you need among the seven available; to build a colour code, order one pack per colour.
The 6 X 2 in I-shaped marker is a dash: placed in a row, several markers draw a straight line or a dotted boundary, such as an aisle edge or the side of a pallet position. For corners, crossings and junctions, choose the L, cross (+) and T shapes.
For the person who kneels in the aisles to apply the markers, plan for the Impacto (VG102) skid-proof non-marking hard-shell knee pads and, to handle and press the markers, the Dexterity (GS13KFNT) A3 cut-resistant Kevlar blended-knit glove with foam nitrile coating. The 3M Solus (YAS1101) S1101SGAF clear anti-fog safety glasses protect the eyes, the men's (V6692) 6692 high-visibility orange 16-pocket surveyor's vest keeps the installer clearly visible in aisles with forklift traffic, and the Laser Lite (OA1101) uncorded disposable earplugs reduce warehouse noise.
Three useful additions for floor marking are: yellow and black self-adhesive warning tape (ECT750), Warning forklift traffic sign (EOS509) and 360-degree full-dome mirror (M86). Select them according to the layout and hazards present.
Data sheet
Specific References
You might also like