compare_arrows

Plain photoluminescent tape, 30 ft

Reference : ECTPH-1
$34.85

This item is not kept in stock. Please allow 5 days for delivery.

Plain photoluminescent tape to mark stair nosings, handrails, door frames and routes to exits, available in 30 ft rolls in a 1, 2, 4 or 6 in width. It recharges with ambient light, with no electricity, and the manufacturer states 6 hours or more of glow. With a total thickness of 0.013 in (13 mil), it carries a permanent pressure-sensitive adhesive for clean, dry indoor surfaces.

Width: 1 in
Quantity

Compare

Plain photoluminescent tape, 30 ft

This item is not kept in stock. Please allow 5 days for delivery.

Available widths: 1 in, 2 in, 4 in and 6 in, 30 ft roll

Available in 4 widths, in a single colour. Select the variant you need from the drop-down menu.

Sylprotec codeWidthLengthWeightBest use
ECTPH-11 in (2.54 cm)30 ft (9.14 m)0.25 lb (0.11 kg)Stair nosings, handrails, door frames
ECTPH-22 in (5.08 cm)30 ft (9.14 m)0.5 lb (0.23 kg)Steps, handrails, exit routes
ECTPH-44 in (10.16 cm)30 ft (9.14 m)1 lb (0.45 kg)Wall markers, door frames, exit routes
ECTPH-66 in (15.24 cm)30 ft (9.14 m)1.5 lb (0.68 kg)Walls, long routes, emergency equipment

The dimensions shown are for variant ECTPH-1.

This plain photoluminescent tape lays out markers that stay visible when the lighting fails. Its photoluminescent pigment absorbs ambient light during normal lighting hours, then releases it as a glow in the dark, with no electricity: the manufacturer states 6 hours or more of luminance. With a total thickness of 0.013 in (13 mil), it carries a permanent pressure-sensitive adhesive for clean, dry indoor surfaces. It complements emergency lighting and exit signage, without replacing them. The 30 ft (9.14 m) roll comes in a 1 in (2.54 cm), 2 in (5.08 cm), 4 in (10.16 cm) or 6 in (15.24 cm) width. It is made in the United States.

Features of the plain photoluminescent tape

  • Recharges with ambient light and glows for 6 hours or more in the dark.
  • Works with no electricity or battery.
  • Total thickness of 0.013 in (13 mil).
  • Permanent pressure-sensitive adhesive for a lasting application.
  • Four widths, from stair nosings to walls and long routes.

Plain photoluminescent tape applications

The manufacturer recommends it for emergency exit routes and stairwells, marking handrails, door frames and safety equipment, and evacuation markers in the event of a total lighting failure. Important: check with local, provincial and federal authorities that this product is suitable for your use in an evacuation route or emergency exit. To mark off a hazard area with stronger contrast, other patterns come on separate pages: the striped photoluminescent tape (ECTNOPH), black, 30 ft and the striped photoluminescent roll (ECTRGPH), red, 30 ft.

Plain photoluminescent tape technical specifications

FeatureDetail
TypePlain photoluminescent tape
ColourPhotoluminescent
MaterialVinyl
Luminance6 hours or more in the dark after charging with ambient light
Total thickness0.013 in (13 mil, 0.33 mm), ± 10%
Widths1 in (2.54 cm), 2 in (5.08 cm), 4 in (10.16 cm) or 6 in (15.24 cm)
Length30 ft (9.14 m) per roll
AdhesivePermanent, pressure-sensitive
Application surfaceClean and dry, indoors
Standards cited in the technical data sheetDIN 67510-1, ASTM E2072-04, ASTM E2073-02, ISO 16069, ISO 17398, MIL-L-3891B
Other mentions for the plain versionInternational Fire Code, Section 1025.4; ASTM E2072
Country of originUnited States
Sold byRoll

Photoluminescent tape installation and care

Clean the surface and let it dry: the permanent adhesive requires a clean, dry substrate. Unroll the tape, cut it to length and press it firmly across its full width. Apply it where it receives ambient light during normal lighting hours, since that light recharges it. Keep its surface clean so it keeps charging and glowing, and replace any damaged section.

FAQ: plain photoluminescent tape

Which width should I choose?

The 1 in follows a stair nosing, a handrail or a door frame. The 2 in gives a more visible band on a step or handrail. The 4 in suits wall markers and routes. The 6 in lays out the most visible band on a wall or along a route.

How long does it glow in the dark?

The manufacturer states a visible glow for 6 hours or more in the dark, after charging with ambient light.

Does it need power or sunlight?

No. It recharges with ambient light, with no electricity. Apply it in a spot that is lit during normal working hours.

Does it replace emergency lighting?

No. It complements emergency lighting and exit signage by marking routes, steps and door frames. Check with local, provincial and federal authorities that the product is suitable for each use in an evacuation route or emergency exit.

Which standards does its technical data sheet cite?

The technical data sheet of the plain tape cites DIN 67510-1, ASTM E2072-04 (photoluminescent safety markings), ASTM E2073-02 (luminance testing), ISO 16069, ISO 17398 and MIL-L-3891B. The International Fire Code, Section 1025.4, and ASTM E2072 are mentioned for this plain version only, not for the striped versions.

Suggestions for the plain photoluminescent tape

For the maintenance technician who marks the steps and door frames of a plant stairwell, plan for the Impacto (VG105) knee braces with joint and hard shell, the TenActiv (GS13TAGPU) ASTM/ANSI A2 polyurethane-coated cut-resistant gloves to cut the tape, the 3M Virtua (YA11329) Max 11329 safety glasses with clear lenses, the Delta Plus (TA14LR) Independence safety helmet, type 1 class E and the Max (OA1100) polyurethane disposable earplugs near machinery.

To complement your equipment: Photoluminescent Running Man exit sign without arrow (EI308PH); Emergency exit light in French (“Sortie”), 120V with battery, meets CSA. Steel casing, simple or double face (LUMB) and "Attention à la marche" sign in French, various sizes and materials (ECM300).

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

ECTPH-1

Data sheet

Product group
Safety equipment
Main category
Sign and lock
Sub category
Cones and barricade tapes
Name of the product
Photoluminescent tape
Product code
ECTPH
Sort by keywords
Marking tapes
Product use
Photoluminescent marking
Approved/Certified
DIN 67510-1 ; ASTM E2072-04 ; ASTM E2073-02 ; ISO 16069 ; ISO 17398 ; MIL-L-3891B
Manufacturer
Incom Direct
Country of origin
United States of America
Thickness in mils
13 mils
Choice of format
1, 2, 4 and 6 in
Features
To mark exits, stairs and handrails in the dark
Additional Features
Charges from ambient light
Characteristic adding safety
Photoluminescent: charges from ambient light, then glows in darkness.
Mounting type
Permanent adhesive back
Material
Vinyl
Length (ft/m)
30 ft / 9.14 m
Dimensions of the product
360 x 1 in / 914.4 x 2.54 cm
Length (in/cm)
4.2 in / 10.67 cm
Width (in/cm)
4.2 in / 10.7 cm
Height (in/cm)
1 in / 2.54 cm
Weight (lb/kg)
0.25 lb / 0.113 kg
Availability
Allow 5 days for delivery
Sold by
Roll
Color
Photoluminescent
HS Code
3920690000
Return conditions
Not returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
Caution
For indoor use

Specific References

MPN
523521P

You might also like

Comments (0)
No customer reviews for the moment.