10“-25” reinforced flexible ventilation duct for Predator air purifier

Flexible ventilation duct with metal wire for air purification: a reliable decontamination solution

The 10-inch flexible ventilation duct is specifically engineered for use with the Predator 750 air scrubber from Abatement Technologies. Its 25-foot reach allows for effective connection between contaminated zones and negative pressure filtration systems. Equipped with a wire along its perimeter, the duct contracts and retracts like an accordion. Whether installed on the intake or exhaust side, this duct supports the safe movement of polluted or filtered air, making it essential for asbestos removal and mold remediation projects.

Please note that the only item we presently sell that requires this item is the PREDATOR® 750 air scrubber (SAH1). That the ventilation duct must be secured on the air inlet or outlet with a hose clamp (SAHCC10).

It is recommended to use the minimal length of ducting for your given situation, since the length of the duct affects the air scrubber efficiency.

Special features of the flexible ventilation duct for asbestos removal :

Made from gray, flexible material, this duct combines strength with adaptability. Its 10-inch diameter fits securely onto compatible air purifiers using a hose clamp, ensuring airtight connections. The 25-foot length offers installation flexibility across complex job sites, while the clear design allows visual inspection of airflow and potential blockages.

Installing the ventilation hose with armature on an air purifier :

To install, attach the duct to the intake or exhaust port of the Predator 750 air scrubber using a compatible locking clamp. If the unit lacks a direct connection, secure the duct to an inlet manifold. For optimal performance, use the shortest duct length necessary to minimize airflow resistance and maintain filtration efficiency.

Maintenance of the Mylar ventilation duct for safe use :

Although the duct can be cleaned, it is often recommended to dispose of it after use, especially in asbestos abatement scenarios where contamination risk is high. If reuse is necessary, rinse thoroughly with clean water and allow it to dry completely. Proper maintenance helps preserve air quality and protects workers from exposure.

Tips for the flexible ventilation ducting for asbestos removal :

Use this duct only with compatible air purifiers such as the Predator 750. Ensure clamps are tightly secured to prevent air leaks. Avoid sharp bends that could restrict airflow and reduce system efficiency. Store the duct in a clean, dry location to prevent damage before deployment.

FAQ on flexible air ducting for air purifiers

Is this duct compatible with all air purifiers?

 It is designed for use with the Predator 750 (SAH1) or any unit with a 10-inch intake or exhaust port.

Can the duct be used to discharge filtered air?

 Yes, it can be connected to the exhaust side to direct clean air away from the contaminated area.

Is the duct reusable after asbestos abatement?

 While it can be cleaned, disposal is often recommended to avoid cross-contamination risks.

Suggestions for additional products on flexible ventilation duct with armature for air purifier :

Need additional safety equipment? See the articles; Safety Liberty hard hat (TA14LR), Omega II minor hard hat type 1 (TA14FS), motorized respirator with 1000 protection factors (R6800PF), 3M mask protection film (R6885).

Under "Accessories" at the bottom of the page. If you're looking for work equipment, have a look at the following products: White antistatic coveralls with (V51) and containment fabric (SACTT2).

The texts colored in green correspond to hyperlinks leading to specific safety equipment or to a general information link.