Flexible duct having 8 in / 20.32 cm diameter for axial blowers, available in 3 lengths 6, 15 or 25 ft

$157.40

Please select the available option below :

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Flexible ducts with 8 in / 20.32 cm diameter. Available in 3 lengths, 6 ft / 1.82 m, 15 ft / 4.57 m or 25 ft / 7.62 m. Use in combination with 8" diameter blowers. Operates in both directions, provides maximum flow with minimum friction.

Allegro Industries manufacturer's code: 9500-15 for the 15' and 9500-25 for the 25'.

This model is available in 3 lengths. Please select your size from the menu above.

Ducting Features:

  • 8" / 20.32 cm diameter
  • 6 ft / 1.82 m, 15 ft / 4.57 m or 25 ft / 7.62 m long
  • Made of vinyl and polyester coated with chlorinated polyvinyl (PVC)
  • One ply
  • Temperature range -20°F to 180°F / -28.8 °C to 82.22 °C
  • Compressible for easy storage
  • Class 1 steel reinforcement
  • Meets ASTM 227 standards
  • High visibility yellow colour with black trim
  • Equipped with a quick release clip on the ends

Other equipment frequently used with this duct:

Type of productSafety equipment
Main categoryIndustrial accessoiries
Sub categoryAsbestos decontamination
Name of the productFlexible and compressible ventilation duct
Series of productsCOM-PAZ-IAL PLASTIC BLOWERS
Product codeRA9500
Approved/CertifiedMeets ASTM 227 standards
ManufacturerAllegro industries
Country of originUnited State of America
Diameter of the opening8 in / 20.32 cm
Choice of formatAvailable in 3 lengths of duct: 6 ft / 1.82 m, 15 ft / 4.57 m or 25 ft / 7.62 m
ReusableReusable with careful inspection and proper installation
Features8" / 20.32 cm diameter flexible ducting for confined space blowers
Additional FeaturesWorks in both directions, provides maximum flow with minimum friction
IncludesQuick connect fasteners on the ends
Type of ventilation ductClass 1 steel reinforced compressible conduit for toxic environments
Ventilation duct materialMade of one ply material, vinyl and polyester coated with PVC
Inside diameter of the duct8 in / 20.32 cm diameter
Thermal resistance of the duct-20°F to 180°F / -28.8 °C to 82.22 °C
Length of the ductDepending on product selection: 6, 15 ft or 25 ft / 1.83, 4.57 m or 7.62 m
Duct complianceMeets ASTM 227 standards
Material1Vinyl and polyester
Material2Chlorinated polyvinyl chloride (PVC) coating
Material3Class 1 hard draw spring steel wire helix
Length (in/cm)11 in / 27.94 cm
Width (in/cm)28 in / 71.12 cm
Height (in/cm)11 in / 27.94 cm
Weight (lb/kg)12 lb / 5.4 Kg
***Size and weight according to selection***Based on the RA9500-825
Sold byUnit
ColorYellow/Black
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Accessories

30 other products in the same category: