Assembly designed to maintain airflow at the entrance of a manhole, 8 or 12" diameter duct, 6 or 15 feet long

$531.55

Please select the available option below :

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Kit designed to maintain airflow at the entrance of a manhole. This product is available in 8" or 12" diameter. It is also available in two lengths of duct: 6' / 1.83 m and 15' / 4.57 m.

Allegro Industries manufacturer's code: 9550-10, 9510-55, 9510-60, 9510-65.

This model is available in a variety of diameters and lengths. Please select your size from the menu above.

This device allows distributing and maintain an adequate air flow while allowing easy access to the workers with the minimum of obstruction. The liner is collapsible and reshapes itself once the worker has descended into the manhole.

The MVP (Manhole Ventilation Passthru) is the first manhole system that combines a low-profile air vent, 90° elbow and integrated mounting plate into one system. The low-profile elbow installs under the bottom crossbar of the guardrail (EPTBB). Manhole cover fits into the flat fluted corners to stabilize it

The ducting is stored in a small storage bag built into the product. A quick release drawstring allows the conduit to be released from the manhole. Once the work is completed, it is easily stored.

This innovative product was developed by Allegro Industries and is protected by U.S. Patent D673.668.

Characteristics of the deflector:

  • Made of linear low-density polyethylene (LLDPE)
  • This part is fully recyclable if needed.
  • High visibility yellow colour.

Duct Characteristics:

  • Made of polyester and vinyl coated with chlorinated polyvinyl chloride (PVC)
  • Conduit is compressible and has steel reinforcement around the edge
  • Material withstands temperatures up to 180˚F / 88.2˚C
  • Meets the specifications of ASTM 227
  • Meets the specifications of the UL 94V-0 flame resistance standard

Other equipment frequently used with this device:

Type of productSafety equipment
Main categoryIndustrial accessoiries
Sub categoryAsbestos decontamination
Name of the productVenting assembly for a manhole
Series of productsCOM-PAZ-IAL PLASTIC BLOWERS
Product codeRA9510
Approved/CertifiedMeets ASTM 227 specifications and meets UL 94V-0 flame resistance specifications
ManufacturerAllegro industries
Country of originUnited State of America
Diameter of the openingChoice of 8 in / 20.32 cm or 12 in / 30.4 cm
ReusableReusable with careful inspection and proper installation
Recommended use temperatureWithstands temperatures up to 180°F / 88.2°C
FeaturesKit designed to maintain airflow at the entrance of a manhole. This product is available in 8" or 12" diameter. It is also available in two lengths of duct: 6' / 1.83 m and 15' / 4.57 m
Additional FeaturesThis device distributes and maintains adequate airflow while allowing easy access to workers with minimal clutter. The duct is collapsible and reshapes itself once the worker has descended
Characteristic adding safetyThe low profile elbow fits under the bottom crossbar of the guardrail (EPBBT). Manhole cover fits into flat fluted corners to stabilize it
IncludesThe MVP (Manhole Ventilation Passthru) combines a low profile air vent, a 90° elbow and an integrated mounting plate into one system
Includes 2The conduit is stored in a small storage bag built into the product. A quick-release drawstring allows the conduit to be released into the manhole
Type of ventilation ductClass 1 steel reinforced compressible conduit for toxic environments
Ventilation duct materialMade of one ply material, vinyl and polyester coated with PVC
Inside diameter of the ductDepending on product selection: 8 in / 20.32 cm or 12 in / 30.48 cm
Thermal resistance of the ductWithstands temperatures up to 180°F / 88.2°C
Length of the ductDepending on product selection: 6 or 15 ft / 1.83 or 4.57m
Duct complianceMeets ASTM 227 and UL-94 V0 flammability standards
Material1Linear low density polyethylene (LLDPE)
Material2Polyester and vinyl
Material3Chlorinated Polyvinyl Coating (PVC)
Length (in/cm)26 in / 66.04 cm
Width (in/cm)41 in / 104.14 cm
Height (in/cm)23 in / 58.42 cm
Weight (lb/kg)15 lb / 6.80 Kg
***Size and weight according to selection***Based on the RA9510-1215
Sold byUnit
ColorYellow/Black
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Accessories

30 other products in the same category: