Ergodyne N-Ferno 6842 long winter liner

Ergodyne N-Ferno 6842 long 2-layer fleece winter liner, covers the neck

This item is not stocked. During the winter season, allow 5 to 7 days for delivery; off-season, contact us for the lead time.

Ergodyne manufacturer code: 16842, model N-Ferno 6842. On a windy job site, the cold often gets in between the coat collar and the edge of the hard hat. This extra-long liner goes down to the shoulders to cover the head, ears and neck. Its two insulating layers combine a water-resistant PU-coated polyester fabric with a durable finish that resists abrasion, and an incredibly soft 100% polyester fleece lining for all-day comfort. Lightweight and low-profile, it is designed to be worn under a compatible hard hat. Check that the liner is compatible and does not compromise the fit of the hard hat.

Features of the N-Ferno 6842 liner

• Two layers: PU-coated polyester fabric and polyester fleece lining.
• Water-resistant fabric with a durable finish.
• Long model: goes down to the shoulders and covers the head, ears and neck.
• Lightweight and low-profile, worn under the hard hat.
• Elastic forehead rim that traps heat.
• Chin strap and four hook and loop straps for the hard hat suspension.
• One size fits most hard hats, machine washable.

Thermal protection and hard hat attachment

The PU-coated fabric stops moisture from snow, and the fleece lining keeps warmth against the head and the nape of the neck. The elastic forehead rim keeps the liner snug to trap heat and keep cold out. A hook and loop chin strap holds it in place, and four exterior hook and loop straps attach to the safety helmet suspension. Unisex and one size, it fits most hard hats. The black version offered here has no pockets.

Dimensions of the long liner laid flat

These measurements describe the liner itself, laid flat, not its packaging. They are published by a distributor; Ergodyne confirms the long, shoulder-length cut.

About the classification of the black low-visibility liner

It is important to note that black work clothing is not commonly used for high visibility, because it is not as visible as fluorescent or bright colours. Black is mainly chosen for aesthetic reasons or to better hide dirt.

This black liner has no retroreflective stripes and no high-visibility class: near traffic, wear it with high-visibility clothing.

Applications of the long hard hat liner

Ergodyne designs this liner for those who must wear a hard hat in the cold, in construction, freight, mining and more. For a shorter cut that stops at the chin, choose the Ergodyne N-Ferno 6840 short winter liner (VNF6840), offered on its own listing.

Liner use restrictions

This liner protects against cold; it is not flame-resistant and does not replace impact protection, which remains the role of the hard hat. It claims no certification.

Liner care and service life

Ergodyne states it is machine washable. Wash it on the delicate cycle in cold or lukewarm water with a mild detergent, without bleaching agents, chlorine bleach or fabric softener, then let it air dry away from sunlight, without a dryer or ironing. Replace it when the fleece is worn or the hook and loop straps no longer hold.

FAQ: Ergodyne N-Ferno 6842 liner

What part of the head does it cover?

This is the long model: it goes down to the shoulders and covers the head, ears and neck. For a cut that stops at the chin, choose the Ergodyne N-Ferno 6840 short winter liner (VNF6840).

How does it attach to the hard hat?

With four exterior hook and loop straps that attach to the hard hat suspension, and a hook and loop chin strap.

Is it compatible with my hard hat?

It is one size and fits most safety helmets.

Does it have hand warmer pockets?

No. According to Ergodyne, the side hand warmer pockets are reserved for the hi-vis version, which is not offered on this listing.

Can it be washed?

Yes, by machine, on the delicate cycle in cold or lukewarm water; then let it air dry, without a dryer.

Suggestions for work under a hard hat in the cold

Complete the outfit with the MSA Super V safety helmet (TA82), the Pioneer orange and black winter overalls (V50402C), the Endura insulated cowhide one-finger mitts (G915), the Pioneer high-visibility yellow fleece hoodie (VV6941), the black winter coat (VV54) with retroreflective stripes and the Zenith clear anti-fog goggles (YG456).

To equip the hard hat, add the elastic chin strap (TA80CS) for MSA hard hats, the spare ratchet suspension (TA80RS) for MSA hard hats, the silver retroreflective strips (TA5) for hard hats, the Energizer Vision HD+ headlight (LL06) and the 3M Peltor cap-mounted earmuffs (OPH10P3E).

Ergodyne hand-warmer muff (VNF6980) ; hand warmer sachets (VCHM20) ; toe warmer sachets (VCHO20).

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.