Cut-resistant level A3 Kevlar blended-knit glove with foam nitrile coating

Cut-resistant ASTM/ANSI A3 Dexterity® Kevlar® blended-knit glove with foam nitrile coating

This Dexterity® cut-resistant glove (Superior product code S13KFNT) is made from a Kevlar® blend coated with foam nitrile over the palms and fingers, sold in pairs. It has a cut resistance level A3, abrasion level 3 and puncture level 3 according to ASTM and ANSI standards. Available in sizes ranging from extra-extra-small (5) to double extra-large (11). Please select the size needed in the field located above.

Superior manufacturer's code: S13KFNT

Features of the lightweight, grippy Dexterity Kevlar glove

This comfortable, lightweight glove does not hamper dexterity while providing outstanding protection from cuts and abrasion. The foam nitrile coating provides an excellent grip on both oily and slippery surfaces.

Kevlar® properties for tensile strength and cut resistance

Kevlar®, a thermoplastic polymer related to aramids, is a low-density, high-strength material offering excellent tensile strength, elongation and shear strength. It does not expand from temperature changes, fairly absorbs vibrations and shock, does not strain the hand and reacts well chemically to hydrocarbons.

Non-slip foam nitrile properties

Nitrile foam has essentially the same properties as regular nitrile; the difference lies in the additives dispersed through the compounding — in this case a vulcanizing agent and a foaming agent, which cause a small loss of elasticity. Nitrile foam offers a better barrier performance against viruses, blood-borne pathogens and liquids than latex foam, but does not protect entirely, since the frothing of nitrile makes it porous and thus permeable. As long as the manufacturer's limitations on use are respected, the glove remains comfortable and offers good dexterity.

Applications of the cut-resistant glove for automotive, glass and metal stamping

This glove is ideal for workers in the automotive industry, light metal stamping, handling small parts, the maintenance industry, HVAC maintenance and the glass industry.

Usage restrictions of the Kevlar glove with foam nitrile coating

Kevlar® is known to have low resistance to UV light and moisture. Foam nitrile has low resistance to open flames and is not waterproof. This glove cannot eliminate the risk of cuts and lacerations.

Maintenance and service life of the Dexterity Kevlar glove

Basic regular maintenance extends the life of your gloves. Wash them in cold water (i.e. 85 °F/30 °C) with a mild detergent. Rinse in cold water before drying, then tumble-dry on low heat. Never use bleach on this glove.

FAQ about the A3 Dexterity Kevlar cut-resistant glove

What is its resistance level?

It offers cut level A3, abrasion level 3 and puncture level 3 according to ASTM and ANSI standards.

Does it grip well on oily surfaces?

Yes. Its foam nitrile coating ensures an excellent grip on both oily and slippery surfaces.

What sizes are available?

It is available from extra-extra-small (5) to double extra-large (11), sold in pairs.

Does it protect against liquids or heat?

No. The foam nitrile is porous (not waterproof) and has low flame resistance: this glove is not designed for thermal protection or immersion.

How do I care for it?

Wash it in cold water (30 °C) with a mild detergent, rinse in cold water, then tumble-dry on low heat. Never use bleach.

Complementary equipment suggestions for your cut protection

To complete your safety equipment, see the 18-gauge touchscreen-friendly version (GS18KGFN), the Tenactiv™ cut-resistant ANSI A7 glove (GSTACXPNRT), the A9 stainless steel chain mail cut-resistant glove (G100), the Tenactiv™ cut-resistant ASTM/ANSI A9 glove (GS21TXUFN), the Tenactiv™ cut-resistant ASTM/ANSI A4 glove (GSTAFGFNT) and the A4 cut-resistant winter glove with waterproof membrane (GS18WTFN). Under "Accessories" at the bottom of the page, complete with the Chemstop cotton knit glove coated with nitrile (GNTFC) and the Sentec safety eyewear with clear polycarbonate lenses (YA12E90801).

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.