First aid kit with a 28-types of item content for trauma care

The CNESST first aid kit with 28 types of items is specifically designed to meet the needs of trauma treatment in the workplace.

It includes all essential components to manage emergencies efficiently, allowing for a quick and effective response. Compliant with CNESST requirements, this kit ensures that you are prepared to handle various emergencies while adhering to current health and safety standards.

Unlike standard kits, this model offers a variety of items to stabilize various injuries, ranging from simple cuts to trauma requiring more advanced intervention. Whether you are responsible for an office, a small workshop, or a retail store, this professional safety case ensures your employees' protection while avoiding non-compliance during inspections.

Investing in this kit means choosing reliability for your emergency protocol. Its robust design and medical-grade content make it the preferred choice for Canadian companies concerned about safety. Do not let the unexpected compromise your operations: opt for a proven emergency care solution that puts your staff's health first today.

Provide your team with peace of mind with this comprehensive and reliable first-aid solution.

Contains:

25 Assorted Fabric Dressings (PS101)
6 Topical Antibiotic Ointments Bacitracin Zinc 0.9 gr. (PS208-6)
25 Benzalkonium Chloride Antiseptic Wipes (swabs), 0.13% (PS215)
6 Individually wrapped hand cleaning wipes (PS681)
12 Sterile gauze pads, 7.6 X 7.6 cm (3 X 3 in) (PS302)
6 Sterile gauze pads, 10 X 10 cm (4 X 4 in) (PS304)
4 TELFA non-adherent pads 5.1 X 7.6 cm (2 X 3 in). (PS298)
1 KLEEN gauze roll 5 cm X 3.7 m (2 in X 12 ft) (PS313)
1 KLEEN gauze roll 7.5 cm X 3.7 m (3 in X 12 ft) (PS314)
1 Sterile compress or dressing with ties 10 X10 cm (4 X 4 in). (PS319)
2 Sterile pressure bandages with ties, 15 X 15 cm (6 X 6 in) (PS320)
1 Abdominal pad, sterile, individually wrapped, 5 X 9 inches (PS321)
1 Elastic or compression support bandage, 7.6 cm X 5 m (3 in X 16.5 ft) (PS404)
2 Triangular bandages, 40 X 56 cm (40 X 56 in) with 2 pins (PS408)
2 Rigid plastic eye covers (PS511)
2 Sterile eye pads, 7.5 X 4.5 cm (2.75 X 1.75 in) (PS514)
1 Hypoallergenic adhesive tape, 2.54 cm X 9.1 m (1 in X 30 ft) (PS415)
1 Instant cold pack with box, 4 X 6 in (10.16 X 15.24 cm) (PS614)
1 Stainless steel bandage scissors with angled blades, rounded tip 5.5 in (PS701)
1 Stainless steel ultra-fine splinter forceps 4 1/2 in (11.4 cm) (PS725)
1 Disposable rescue blanket 204 x 140 cm (56 X 80 in) (PS713)
1 Multipurpose splint (SAM Splint), foam with aluminum frame, 61 cm (24 in). (PS797)
10 DEX 4 Orange Flavor Glucose Tablet (PS829)
1 CPR barrier device (PS854)
1 Resuscitation mask (CPR) with valve and holster (PS852)
4 Nitrile gloves, powder-free, 4 mil, large, one size fits all (PS706)
1 Adult and pediatric military style arterial tourniquet, black (PS818)
2 Biomedical waste bags 6 X 9 inches (PS827-1)
1 TRAUMA first aid kit soft bag (TRAUMA-SAC)

Dimensions 40.6 X 21.6 X 14 cm. (16 X 8 1/2 X 5 3/4 in.)

Product Features: A Comprehensive Safety Case with 28 Specialized Item Types

This rescue kit stands out for its versatility and regulatory compliance. Its key features include:

• A complete inventory of 28 item categories including bandages, dressings, and care instruments.

• Essential traumatology material: pressure bandages, triangular bandages, and sterile compresses.

• Personal Protective Equipment (PPE): nitrile gloves and protective devices for resuscitation.

• Durable rigid case designed to protect equipment from dust, moisture, and impact.

• Optimized format to meet CNESST first aid standards for the workplace.

How to Install Your Canadian Standards Compliant First Aid Kit

To ensure rapid intervention, the installation of your first aid equipment must be strategic. Mount the rescue kit on a wall at an easily accessible height (approximately 1.5 meters from the floor) in a central, well-lit location. Use a sturdy wall-mounting bracket to prevent the case from falling. The kit must be located near high-risk areas and be clearly marked with a "First Aid" signage poster visible from a distance by all personnel.

How to Maintain Your Professional Emergency Care Equipment

Rigorous maintenance is the guarantee of your kit's effectiveness during an emergency. Perform a monthly inspection to verify that all items are present and that sterile seals are intact. Pay close attention to expiration dates on antiseptic solutions and sterile products. After each use, immediately replace consumed items. Ensure the case remains clean and the latches function perfectly to allow for opening without delay.

User Tips for Treating Injuries and Trauma

For a minor injury, clean the area with an antiseptic wipe before applying an adhesive bandage. For more serious trauma, such as a hemorrhage, use pressure bandages to apply constant pressure to the wound. Refer to the first aid guide often included or to training protocols to stabilize the victim. Always wear the included nitrile gloves before intervening to ensure a protective barrier against biological fluids.

FAQ: Frequently Asked Questions About the 28-Item CNESST Kit

Is this kit sufficient for my company according to CNESST?

This kit is designed to meet the basic requirements of the CNESST. Depending on the number of employees and the risk level of your sector (low or high), it may serve as a primary or secondary unit. It is recommended to check the first aid minimum standards regulation in your province.

Can additional items be added to the case?

Yes, the case offers enough space to add specific items tailored to the particular risks of your workplace, such as eye wash or burn gels, while maintaining the basic regulatory content.

What types of bandages are included for trauma?

The kit contains sterile pressure bandages of different sizes, cotton triangular bandages, and rolls of elastic gauze, allowing for the effective treatment of sprains, suspected fractures, and significant bleeding.

Suggestions for first aid kit:

Other equipment frequently used with this high-visibility orange raincoat set (VP5618). (TA14LR) safety helmet and the essential safety helmet chin strap (TA14CS) our (EPTCONE28) traffic cones.

You'll need additional equipment, such as warning lines with built-in flags (EFLAC), road posts with "T" shape as (EPAL191) road posts, the post with the shape of the "∩" model or (EPAL192 model) or the beacon (EPAL2319) the largest of the group. Danger red barricade tape (ECT3RE9), caution yellow barricade tape (ECT3YE1), danger yellow barricade tape (ECT3YE7) and bilingual yellow barricade tape (ECT3YB1). 

The texts colored in green correspond to hyperlinks leading to specific safety equipment or to a general information link.