High-visibility orange raincoat set made of 150D Oxford weave and polyurethane, sold by set sizes S to 4XL

$86.25

Please select the available option below :

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

100% waterproof, high-visibility orange ensemble with silver reflective stripes. This set meets the requirements of CSA Z96-22, class 2, level 2 when worn separately, but when worn with the corresponding overalls, the set meets the requirements of CSA 96-22, class 3, level 2.

Pioneer part number : V1080350 model number : 5618

This set (coat and overalls) is available in sizes ranging from small (S) to quadruple extra large (4XL). Please choose your size from the drop-down menu above.


This polyester raincoat is made from 150-denier yarns with a tear-resistant Oxford knit pattern. The inside of the coat is coated with polyurethane to make it waterproof and breathable.
A practical hanging case is included.
All seams are taped and heat-sealed. This lightweight, supple coat is ideal for occasional use

Peculiarities of:
Reflective stripes and visibility:
This fluorescent orange waterproof jacket features 50 mm (2 in.) wide Star Tech® retroreflective silver stripes. It also features two vertical stripes at the front, two crossed X stripes at the back, a horizontal stripe at the waist and a stripe around the elbows.
Fluorescent orange is highly visible during the day and in conditions with lots of artificial light. In most situations, it also offers high contrast with the background. Fluorescent orange is, however, less visible at night and in conditions of low natural or artificial light, such as dawn or dusk.
Silver retroreflective strips are highly visible in natural or artificial low-light conditions, as they reflect light back towards the source of the beam (flashlight, car headlights, etc.). They therefore offer the greatest safety at dawn, dusk and at night. However, they do not increase visibility during the day.

Design:
The coat has 2 flap pockets, a hem with drawcord and drawstring, and closes with a full-length, heavy-duty toothed zipper. The coat is easy to wear over warm clothing, while still allowing good air circulation thanks to its loose fit. The hood folds into the collar. A lightweight mesh lining partially covers the upper back for added comfort and breathability.
The polyurethane-lined polyester coat inside is made from 150-denier yarns. In simpler terms, this lightweight coat has a 150 denier Oxford weave expressing the 9,000 m weight of the yarn used, so 150 denier equals 150 g offering very good resistance to tears and abrasion. Oxford weave is obtained by crossing a weft thread (horizontal thread) and a warp thread (vertical thread) to create a checkered appearance.
The dungarees feature elastic straps, metal buckles and snap hems for a snug fit.

Waterproofing:
Polyurethane-coated waterproof garments are generally worn by workers exposed to low risks of chemical splashes. Polyurethane is a light, porous material. It can be used to make lightweight, breathable garments. However, in the event of heavy rain and strong winds, polyurethane becomes saturated with water and loses its impermeability. Once waterlogged, polyurethane allows water to penetrate the coat under the slightest pressure, such as bending over or leaning against something.

Application:
It is recommended for workers who are around moving vehicles: school crossing guards, drivers, transport employees, etc.

Restriction: 
This waterproof set is not flame-resistant.

Maintenance and service life: 
This waterproof set can be machine-washed on the gentle cycle in cold or lukewarm water with a mild detergent. Do not use bleach or fabric softener. It should also be air-dried, away from direct sunlight. This coat should never be tumble-dried, ironed or dry-cleaned.

Suggestions:
Need additional safety equipment? See items; cut resistant glove (GS21TXUFN), Traffic vest (VV50), Surveyor vest (V6672), Traffic cone 28 in. (EPTCONE28B), Orange nylon-latex knit glove (G051144) under "Accessories" at the bottom of the page. You are looking for equipment to work with, see the following products: Ranpro (VC405FUL).

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

Type of productSafety equipment
Main categoryPersonal protection
Sub categorySafety clothing
Sub sub categoryRainwear & rain gear
Name of the productHigh visibility waterproof coat
Series of productsPioneer®
Product codeV5618
Approved/CertifiedThe rainsuit complies with the requirements of CSA standard 96-22, class 3, level 2
ManufacturerSurewerx
Country of originChina
Fineness of the knitting150 deniers
Flame ResistanceNo Flame resistant
Choice of formatSize small (S) to 4 extra-large (4XL) available
ReusableReusable with prior hygienic measurement
FeaturesWith alternating silver retroreflective and fluorescent orange stripes (50 mm / 2" wide). 2 vertical stripes on the front, 2 crossed X stripes on the back, 1 horizontal stripe on the waist and 1 stripe around the wrists
Additional FeaturesEquipped with four large ventilation openings protected by flaps and two large pockets with flap closure
Comfort featuresAll seams are taped and heat sealed
Precision on the color of the material and their visibilitiesFluorescent orange is very visible during the day and in conditions with a lot of artificial light. In most situations, it also provides high contrast with the background
Waterproof ratingThe manufacturer grants this product a waterproof rating of 5000 mm. All seams have been taped and heat-sealed
IncludesCloses with a plastic toothed zipper protected by a storm flap that closes with a hook-and-loop closure
Includes 2A detachable hood that adjusts with an elastic cord. It can be easily removed and put back on thanks to the snaps on the collar of the coat
Material1Polyester woven according to the Trilobal (Mc) template
Material2Polyurethane
WashableMachine wash with mild soap and hang to dry out of the sun. DO NOT PUT IN THE DRYER.
Dimensions of the productThe dimensions of the product depend on the size selected by the customer.
Length (in/cm)12 in / 30.48 cm
Width (in/cm)6 in / 15.24 cm
Height (in/cm)6 in / 15.2 cm
Weight (lb/kg)2 lb / 0.9 Kg
Sold byUnit
ColorOrange/Grey/Yellow
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Accessories

27 other products in the same category: