3M peel-off lens cover for 3M premium visor for protection from scratches, chemical spills & airborne particles. 10 units/bag

Optimize clarity and safety with the peel-off lens cover for RM927 high-end visor

3M manufacturer code: M-928.

The  RM927 peel-off lens cover for high-end visors is the essential accessory to maintain crystal-clear visibility and extend the life of your protective equipment.

You may need this product if you use the RM307  headgear.

 In industrial environments such as paint shops, construction sites, or processing plants, your Versaflo helmet visor is constantly exposed to external aggressions. The peel-off lens cover acts as a sacrificial shield that takes the hits and stains instead of your main equipment. Thanks to its high-quality 3M design, this product prevents premature lens opacity caused by sandblasting or liquid splashes. Using these peel-off visor protectors helps maintain a wide and safe field of vision, which improves productivity and reduces eye fatigue for employees. This product is sold in cases of 10 units to meet the needs of demanding businesses.

By choosing this facial protection solution, you guarantee optimal safety for your workers while significantly reducing the replacement costs of fixed visors.

Product features and advantages of the peel-off lens protector

This lens cover stands out for its exceptional optical clarity which does not compromise work precision. Its lightness and thinness allow for clutter-free layering on the high-end visor. The material used is resistant to common chemicals, thus preventing solvents from etching the surface of the main lens. Specific compatibility with M-series models, notably the M-407 or M-927, ensures edge-to-edge coverage. Finally, the economical format in cases of 10 units allows for simplified stock management and a very advantageous cost-per-use for long-duration work.

How to install the lens cover on your protective visor

The installation of the peel-off protector is a simple operation that takes only a few seconds. Before starting, ensure that the visor surface is clean and free of dust. Remove the protective film from the new lens cover and align the side holes with the attachment points located on the sides of the visor. Press firmly to secure the protector in place. It is recommended to smooth from the center toward the edges to eliminate potential air bubbles. Once installed, the lens cover must stay perfectly flat against the visor to prevent particle infiltration between the two surfaces.

How to maintain the product and the high-end visor

Although the lens cover is a removable accessory, minimal maintenance allows for maximizing its utility. If light dust settles on the protector during the day, it can be gently wiped with a dry microfiber cloth. However, as soon as deep scratches or stubborn stains impair visibility, it is imperative to replace the used lens cover with a new one. For the fixed visor located underneath, take advantage of the protector replacement to clean the main lens with a non-abrasive optical cleaning solution, thus guaranteeing perfect transparency under your peel-off protection.

Usage tips for RM927 visor protectors

For maximum efficiency, systematically replace your peel-off lens cover at the beginning of each shift or as soon as vision becomes blurry. In the case of spray painting work, do not wait for the paint to dry completely to evaluate if a change is necessary. Store your boxes of RM927 in a dry place away from direct sunlight to prevent the adhesive or material from degrading. For complete facial protection, ensure that the protector is correctly tensioned so as not to create annoying reflections when using work lamps or in full sunlight.

FAQ about the peel-off lens cover for Versaflo visor

Does the lens cover reduce the impact resistance of the visor?

No, this accessory is an additional layer that does not alter the safety properties of the Versaflo visor; it only serves to protect the surface against aesthetic damage and surface wear.

How many lens covers can be layered on the same visor?

It is advisable to use only one lens cover at a time to guarantee perfect optical clarity. Layering multiple layers could create reflections and reduce the user's visibility.

Is this protector compatible with Versaflo welding helmets?

 The RM928 is specifically designed for transparent M-series visors. For welding work, it is preferable to use specific protection plates for 3M welding hoods which have light filtration properties adapted to the task.

Complementary suggestions

Need additional safety equipment? See the following items: CDN “Cartridge Respirator Required” sign (ECO106), “Notice: Cartridge Respirator Required in This Area” sign (EOAV328), half-face respirator (R6200), full-face respirator (RFF402), or Airline (RW2929).

See “Accessories” at the bottom of the page. If you're looking for work equipment, have a look at the following products: Facepiece for respiratory protection (RM307), 3M s-Series hood (RS655) and filter panel R256/02/01.

Texts colored green corresponds to hyperlinks leading to specific safety equipment or to a general information link.